Keypad Lock; Key A Send. - Yealink SIP-T20P User Manual

User Guide SIP-T20P IP Phone
You can set the ―#‖ or ―*‖ to act as the send key while dialing a call.
To set the send key via phone user interface:
1. Press
2. Select Features->Key as Send.
3. Press
from the Key as Send field to disable this feature.
4. Press
You can also configure a send key via web user interface at the path
Phone->Features->General Information>>.
You can lock the keypad of your phone when you are temporarily not using it. This
feature helps you to protect your phone from unauthorized use.
This feature allows you to perform the following:
Menu Key:
Function Key: The function keys are locked. You cannot use the MESSAGE, CONF ,
All Keys:
Lock&Answer:
Note
The emergency number setting, if desired, must be made before lock activation. For
more information, refer to
20
.
Key as Send:
◄ * # ►
or to select ―#‖ or ―*‖ from the Key as Send field, or select Disable
to accept the change.
The MENU key is locked. You cannot access the menu of the phone
until unlocked. A new voice mail can be accessed by pressing
or the MESSAGE key, but cannot be configured.
HOLD, MENU, MUTE, TRAN, RD, Directory, OK, X, line keys and
navigation keys until unlocked.
All keys are locked, except the Volume key. You are only allowed
to dial emergency numbers, reject incoming calls by pressing the
X key, answer incoming calls by lifting the handset, pressing the
Speakerphone key, the HEADSET key or the OK key, place an
active call on hold by pressing the HOLD key and mute/un-mute
the call during an active call.
All keys are locked, except the HEADSET key and the Volume key.
Incoming calls will be answered automatically, but cannot be
ended by your party. The previous conversation is placed on hold.
Emergency Number on page 42.