You can use the call completion feature to notify the caller of a failed call when the
callee becomes available to receive a call.
To configure call completion via phone user interface:
1.
Press
2.
Select Features->Call Completion.
3.
Press
4.
Press
You can also configure call completion via web user interface at the path
Phone->Features->General Information>>.
To use call completion:
When the called party is busy, the following prompt will appear on the LCD screen of the
phone:
1.
Press
2.
When the called party becomes idle, the following prompt appears on the LCD
screen of the phone:
3.
Press
Note
The call completion feature is not available on all servers. For more information, contact
your system administrator.
.
1. Call Completion:
◄ Enable
►
or
to select Enable from the Call Completion field.
to accept the change.
Call Completion
Wait for 112 ?
. The phone returns to the idle screen and call completion is activated.
Call Completion
Dial 112 ?
to redial the number.
Basic Call Features
51