Cleaning The Imaging Guides - Kodak i1400 Series User Manual

Cleaning the
imaging guides
A-61550 May 2007
Clean the exposed (top side) surfaces of the imaging guides. You do
not need to remove the imaging guides for cleaning unless there is dust
or dirt on the underside of the imaging guide. If you need to remove the
imaging guides, follow the instructions for "Replacing the imaging
guides" later in this chapter.
1. Wipe the upper and lower imaging guides with a Staticide Wipe.
2. Dry the imaging guides with a dry Staticide Wipe.
3. Lower the scanner cover and press it down firmly until it latches into
place.
133