Cisco 7975G Software Manual page 63

If you want to...
Connect to Mobile
Voice Access
Turn on Mobile Connect
from your mobile phone
Make a call from your
mobile phone
Turn off Mobile Connect
from your mobile phone
Turn on or off Mobile
Connect access to all your
remote destinations from
your desk phone
Tips
• When calling Mobile Voice Access, you must enter the number you are calling and your PIN if any
of the following are true :
The number you are calling from is not one of your remote destinations.
–
The number is blocked by you or your carrier (shown as "Unknown Number").
–
The number is not accurately matched in the Unified CM database; for example, if your
–
number is 510-666-9999, but it is listed as 666-9999 in the database, or your number is
408-999-6666, but it is entered as 1-408-999-6666 in the database.
Cisco Unified IP Phone User Guide for Cisco Unified Communications Manager 8.6 (SCCP and SIP)
Then...
1. From any phone, dial your assigned Mobile Voice Access number.
2. Enter the number you are calling from, if prompted, and your PIN.
1. Dial your assigned Mobile Voice access number.
2. Enter your mobile phone number (if requested) and PIN.
3. Press 2 to enable Mobile Connect.
4. Choose whether to turn Mobile Connect on for all configured
phones or just one:
All phones—Enter 2.
–
One phone—Enter 1, then the remote destination you want to
–
add, followed by #.
See Placing a Call—Additional Options, page
1. Dial your assigned Mobile Voice Access number.
2. Enter your mobile phone number (if requested) and PIN.
3. Press 3 to disable Mobile Connect.
4. Choose whether to turn off Mobile Connect for all configured
phones or just one:
All phones—Enter 2.
–
One phone—Enter 1, then the remote destination you want to
–
add, followed by #.
1. Press Mobility to display the current remote destination status
(Enabled or Disabled).
2. Press Select to change the status.
3. Press Exit.
Advanced Call Handling
2.
15