Customizing The Phone Screen - Cisco 7975G Software Manual

If you want to...
Change the way the audible
voice message indicator
sounds on your phone
Change the way that the
voice message light on your
handset works
Tip
You can customize your phone to have up to six distinctive ring tones. In addition, you can have a
default ring tone.

Customizing the Phone Screen

You can adjust the characteristics of the phone screen.
If you want to...
Change the phone
screen brightness
Adjust the phone screen
to accommodate your
viewing angle
2
Then...
1. Log in to your User Options web pages. See
Options Web Pages, page
2. Access your message indicator settings. See
Settings on the Web, page
1. Log in to your User Options web pages. See
Options Web Pages, page
2. Access your message indicator settings. See
Settings on the Web, page
Note Typically, the default system policy is to indicate a new voice
message by displaying a steady light on the handset light strip.
Then...
1. Choose > User Preferences > Brightness.
2. To make adjustments, press Up, Down or
3. Press Save, or press Cancel.
Note If you change the brightness setting on your phone, do not unplug the
phone from its power source for at least one minute, or the brightness
setting will not get saved.
For Cisco Unified IP Phone 7971G-GE and 7970G only:
1. Choose > User Preferences > Viewing Angle.
2. To make adjustments, press Up, Down or
3. Press Save, or press Cancel.
Accessing Your User
1.
Controlling Line
7.
Accessing Your User
1.
Controlling Line
7.
.
.
OL-22332-01