Try Out The Sounds - Roland RD-600 Owner's Manual

Try out the sounds
Connections
UT.
R LIMONO} PHONES FIXED.___
DAMPER re. et FC2 THRU/OUT 2 our b R L(MONO)
"000 @@@- °90900 o-
if
MIDI device (page 24, 44, 47)
ip
Headphones
nenacunncasaca$ne,
Pedal switch
St | oe St | cones
Expression pedal (EV-5)
Pedal switch
Power amplifier
* To prevent malfunction and/or damage to speakers or other devices, always turn down the volume,
and turn off the power on all devices before making any connections.
* Use only the specified expression pedal (EV-5; sold separately). By connecting any other expression
pedals, you risk causing malfunction and/or damage to the unit.
Connecting the output jacks
The outputs of the RD-600 can be used either as balanced outputs or as unbalanced outputs. To
use them for balanced output, use a cable with a balanced-type phone plug (TRS type). To use
them for unbalanced output, use a cable with a regular phone plug (TS type).
TRS TS
SLEEVE (Ground) SLEEVE (Ground)
TIP (Hot) TIP (Hot)
RING (Cold)