Accessing The Menu Screens - Roland System-8 Reference Manual

Accessing the MENU Screens

1
Press the [MENU] button.
The MENU screen appears.
[ K ] [ J ]
2
Use the cursor
The corresponding edit screen appears.
* To edit "MASTER TUNE"
to step 4.
[ K ] [ J ]
3
Use the cursor
edit the setting of that parameter.
4
When you have finished editing, press the
Menu Value
[ K ] [ J ]
[VALUE]
Cursor
MASTER TUNE 430.0–440.0–450.0Hz
CONDITION
-128–0–+127
SYSTEM ---
PERFORM EDIT ---
PART EDIT
---
PATCH EDIT
---
PATCH EFFECTS ---
STEP SEQ MENU ---
UTILITY ---
VERSION INFO ---
PLUG-OUT INFO
---
Finely adjusting the tempo
1
Hold down the [SHIFT]
The TEMPO Adjust screen appears.
TEMPO Adjust:
120.0
2
Use the [VALUE] knob to adjust the tempo.
3
By holding down the
decimal point.
4
[EXIT]
Press the button to exit the screen.
MEMO
In the TEMPO Adjust screen, you can change the tempo by holding down the
quarter-note intervals of the desired tempo.
20
buttons to select the item that you want to edit, and press the
or "CONDITION," use the [VALUE]
buttons to select the parameter that you want to edit, and then use the
[EXIT]
Explanation
knob
Specify the basic pitch of the SYSTEM-8.
This is saved within the system settings.
Specifies the state (condition) of the analog sound engine circuit that is being
modeled.
This is saved within the patch data.
Make settings of the entire SYSTEM-8 (only in performance mode).
&
Access the performance edit screen (only in performance mode).
&
Access the part edit screen.
&
Access the patch edit screen.
&
Access the patch effect screen.
&
Make settings for the step sequencer.
&
Access various utility functions.
&
View the SYSTEM-8's system program version.
&
Shows the version of the PLUG-OUT.
&
button and press the
[SHIFT] button and turning the
knob to edit the value without pressing the
button several times to return to the top screen.
"Making System Settings (SYSTEM Setting Screen)"
"Making Settings for the Entire Performance (PERFORM EDIT)"
"Making Settings for Each Part (PART EDIT)"
"Editing a Patch"
(p. 9)
"Patch Effects" (p. 12)
"STEP SEQ MENU" (p. 37)
"Convenient Functions (UTILITY)"
"Viewing the System Version (VERSION INFO)"
"Viewing Plug-Out Information (PLUG-OUT INFO)"
[MENU] button.
[VALUE] knob, you can adjust the value below the
[SHIFT]
button and pressing the
[ENTER] button.
[ENTER] button, and then proceed
[VALUE]
(p. 21)
(p. 16)
(p. 27)
(p. 26)
(p. 26)
[ENTER]
button three or more times at
knob to
(p. 14)