Remote Menu - Sony LMD-2451TD Operating Instructions Manual

3D SETTING
* This setting menu is displayed only when input from BKM-
250TG or DVI is selected.
* Only 2D/3D SELECT is displayed when DVI input is selected.
* Install a BKM-250TG that has a serial number 7100001 or later,
when displaying 3D images using HD-SDI signal inputs.
* The IN (INPUT)-1 connector on BKM-250TG can be used for
left signal input, and the IN (INPUT)-2 connector for right signal
input.
* 720/50P and 720/60P signals are displayed in the NATIVE scan
mode.
USER CONFIG – 3D SETTING
2 D / 3 D S E L E C T :
3 D S I G N A L F O R M AT :
D I S PA R I T Y S I M . :
H O R O P T E R C H E C K :
L E F T :
R I G H T :
F L I P H :
PAY L O A D I D I N - 1 :
Submenu Setting
2D/3D SELECT Switches between 2D and 3D display
mode.
• 2D: Displays input signals for 2D
• 3D: Displays input signals for 3D
3D SIGNAL Selects input signal format for 3D
FORMAT display.
• 3G-B: Displays 3G Level-B HD-SDI
• DUAL: Displays dual-stream HD-SDI
• SEQUENTIAL: Displays field
• SIDE BY SIDE: Displays side-by-
• LINE BY LINE: Displays line-by-
34
Adjustment Using the Menus
xx
xxxx
xxx
xx
xx
xxxx
xxxx
xxx
xx I N - 2 : xx
display mode.
display mode.
signals for 3D display mode.
•INTER: Displays 1080/50i or
1080/60i signal.
•PROG: Displays 1080/24P, 25P,
30P or 720/50P, 60P signal.
•PSF: Displays 1080/24PsF or
1080/25PsF signal.
signals for 3D display mode.
•INTER: Displays 1080/50i or
1080/60i signal.
•PROG: Displays 1080/24P, 25P,
30P or 720/50P, 60P signal.
•PSF: Displays 1080/24PsF or
1080/25PsF signal.
sequential HD-SDI signals for 3D
display mode.
side typed HD-SDI signals for 3D
display mode.
•INTER: Displays 1080/50i or
1080/60i signal.
•PROG: Displays 1080/24P, 25P,
30P or 720/50P, 60P signal.
•PSF: Displays 1080/24PsF or
1080/25PsF signal.
line typed HD-SDI signals for 3D
display mode.
Submenu Setting
DISPARITY SIM. Adjusts the phase of left/right input
signals. You can monitor the depth of 3D
images using simulated 3D effect.
• LR: Shifts the phase of left and right
channels at the same time.
• LEFT: Shifts the phase of left
channel.
• RIGHT: Shifts the phase of right
channel.
HOROPTER Changes display formats in monitoring
CHECK left/right input signals. This helps to
differentiate between left and right
signals.
• NORMAL: Displays video signals.
• BLACK: Displays black signals. (No
video signals)
• MONO: Displays video signals as
grayscale image.
• RED: Displays video signals as RGB
red color component.
• BLUE: Displays video signals as RGB
blue color component.
FLIP H Changes display patterns (normal/
horizontally reversed display) in
monitoring left/right input signals.
• OFF: Deactivates the reversing
function.
• LEFT: Horizontally reverses left
signal.
• RIGHT: Horizontally reverses right
signal.
PAYLOAD ID Displays the channel assign information
of payload ID superimposed on input
signals from the IN (INPUT)-1 and IN
(INPUT)-2 connector on BKM-250TG.
Going out of the 3D SETTING menu
renews channel assign information.
• -: Payload ID is not superimposed on
signals.
• x: Channel assign information is
detected as Link-3 or Link-4.
• LEFT: Channel assign information is
detected as Link-1.
• RIGHT: Channel assign information
is detected as Link-2.
Payload ID is only available when
DUAL is selected in 3D SIGNAL
FORMAT.

REMOTE menu

REMOTE
PA R A L L E L R E M O T E :
S E R I A L R E M O T E :
M O N I T O R :
C O N T R O L L E R :
C O N N E C T I O N :
xxxxxxx
xxx