Sony LMD-2451TD Operating Instructions Manual page 13

*1 Adjustment of SUB CONTROL is the same.
*2 When a component signal (480/60I or 480/60P) is input and
the COMPONENT LEVEL is set to SMPTE, this can be
switchable.
*3 When a BKM-227W is installed, the number of the input
connector is increased.
*4 When a BKM-229X is installed, the number of the input
connector is increased.
*5 When a BKM-220D, BKM-243HS, BKM-244CC or BKM-
250TG is installed, the signal is input.
*6 When a BKM-243HS, BKM-244CC or BKM-250TG is
installed, the signal is input.
*7 Only the interlace signal is input.
*8 When an NTSC signal is input, closed captions are
displayed. Not displayed when any of the format display,
marker display, or multi display is set to ON (see FORMAT
DISPLAY on page 28, MARKER ENABLE on page 29, and
MULTI DISPLAY ENABLE on page 29).
*9 The signal can only be selected in the main display (see SUB
INPUT SELECT on page 30).
*10 When a BKM-244CC is installed, closed captions are
displayed.
*11 When a BKM-250TG is installed, the signal is input.
*12 When a BKM-250TG that has a serial number 7100001 or
later is installed, the signal is input.
*13 3D display mode is available when selecting 3D in 2D/3D
SELECT.
*14 Available when selecting 2D in 2D/3D SELECT.
*15 Displays in 2D display mode when selecting SIDE BY
SIDE in MULTI DISPLAY.
Location and Function of Parts and Controls
13