Connecting The Ac Power Cord - Sony LMD-2451TD Operating Instructions Manual

4
Attach the arm.
Hang the hook of the bracket for using
the A screw holes.
A A A A
B B B B
– +
A A
B B
5
Secure the arm with four screws.
Use the screws removed in step 1.
6
Attach the arm cover.
To remove the stand attachment bracket
1
Put the monitor on a soft cloth with the surface of
the LCD monitor downward.
2
Slide and remove the arm cover of the stand.
3
Remove four screws.
4
Remove the arm.
5
Remove four screws to remove the stand
attachment bracket.
2 3
A A
B B
Hang the hook of
the bracket for
using the B screw
holes.
4
5
1
Connecting the AC
Power Cord
1
Plug the AC power cord into the AC IN socket on
the rear panel. Then, attach the AC plug holder
(supplied) to the AC power cord.
AC plug holder (Supplied)
2
Slide the AC plug holder over the cord until it locks.
To disconnect the AC power cord
Pull out the AC plug holder while pressing the lock
levers.
AC IN socket
AC power cord

Connecting the AC Power Cord

17