Leica D-Lux 4 Instructions Manual page 84

[NO ADDITIONAL SELECTIONS CAN BE MADE]
[CANNOT BE SET ON THIS PICTURE]
on the DCF standard.
[NOT ENOUGH SPACE ON BUILT-IN MEMORY]/[NOT ENOUGH MEMORY ON THE CARD]
There is no space left in the built-in memory or on the card. Pictures form the built-
in memory can be copied to the card until the card is full.
[SOME PICTURES CANNOT BE COPIED]/[COPY COULD NOT BE COMPLETED]
- A file from the card is copied to the built-in memory with a name already existing.
The file/s is not based on the DCF standard.
[BUILT-IN MEMORY ERROR FORMAT BUILT-IN MEMORY?]
If you have formatted the built-in memory on a computer instead of the camera.
Format the built-in memory on the camera again, save data before doing so.
[MEMORY CARD ERROR FORMAT THIS CARD?]
data before doing so.
[PLEASE TURN CAMERA OFF AND THEN ON AGAIN] / [SYSTEM ERROR]
This message appears if the camera is not operating properly. Turn camera off and
on, if the message remains, contact your dealer or Service Centre.
[MEMORY CARD PARAMETER ERROR]
with 4 GB or more capacity.
[MEMORY CARD ERROR PLEASE CHECK THE CARD]
Turn camera off and reinsert the card. An error occurred accessing the card.
[READ ERROR PLEASE CHECK THE CARD]
Turn camera off and reinsert the card. An error occurred reading the data.
[WRITE ERROR PLEASE CHECK THE CARD]
Turn camera off and reinsert the card. An error occurred writing the data.
[MOTION RECORDING WAS CANCELLED DUE TO THE LIMITATION OF...]
Card, the recording process could otherwise be interrupted.
[A FOLDER CANNOT BE CREATED]
A folder cannot be created, as no more memory numbers are available. Format the
camera after saving the data. If you execute [NO.RESET] in the [SETUP] menu after
formatting, the folder number is reset to 100.
[PICTURE IS DISPLAYED FOR 4:3/16:9 TV]
message. Select [TV ASPECT] in the [SETUP] menu if you want to change the TV
aspect.
- The USB connection cable is connected to the camera only, connect the other
end of the USB connection cable to a PC or a printer.
[PRINTER BUSY]/[PLEASE CHECK THE PRINTER]
Check the printer, as the camera is not able to print.
85