Leica D-Lux 4 Instructions Manual page 51

[AF MODE]
This allows the focusing method that suits the positions and number
of the subjects to be selected.
Setting up AF Tracking:
1. Bring the subject to the AF tracking frame and press [AF/AE LOCK].
2. Take the picture.
- If it fails to lock, AF area will flash red, and disappear.
- It is not possible to set
- Dynamic tracking function may not work if the subject is too small,
AF area selection:
by pressing
-
If
1. Press
2. Press [MENU/SET] to set.
If
1. Press
2. Press [MENU/SET] to set.
- The spot metering area can also be moved to match the AF area
- The following operations will return the AF area to the previous posi-
1
Under certain picture-taking conditions, the facial recognition func-
52
1
Face detection
AF Tracking
Multi-area
1-area High-Speed
1-area
Spot
- AF area will continuously focus on the subject's movement once
the subject is recognised. (Dynamic tracking)
- AF tracking is turned off when [AF/AE LOCK] is pressed again.
ing fails.
moving fast, the camera is shaking, the location is dark or the sub-
ject is the same colour as the background, or there is similar colour.
is selected. It is also possible to switch to AF area selection screen
u
when AF mode is selected with
, or is selected:
pqtu
to move the AF area.
edge of the screen)
is selected:
pqtu
to select the AF area.
when using .
tion. When the mode dial is set to snapshot mode
power save mode is activated. When the camera is turned off.
- When the face is not facing the camera.
- When the face is at an angle.
- When the face is extremely bright or dark.
- When there is little contrast on the faces.
- - - -
Focusing is set to detected faces.
Focuses on moving subjects.
Focuses on up to 5 focus areas per AF area.
2
Quick focus on the centre area.
Focus on the centre of the screen.
Focus on a small area of the screen.
when the AF tracking or dynamic track-
mode , or in the motion picture mode.
-
, ,
pq
.
. When the
.
or