Leica D-Lux 4 Instructions Manual page 72

[Windows]
If you are connecting the camera for the first time, the required driver is
installed automatically.
[Apple Macintosh]
The drive is displayed as an icon on the screen as follows:
- No card inserted:
Apply USB cable
to the computer
Folder structure:
Folders are displayed the following
way:
DCIM
100LEICA
L1000001.JPG
L1000999.JPG
101LEICA
999LEICA
MISC
- Up to 999 pictures / folder
- To reset the file / folder number,
select [NO.RESET] in the [SETUP]
menu
- The numbering can change after
replacing a card with a card from a
different camera.
[DLUX4]
Do not disconnect
while ACCESS is
displayed.
Folder number
File number
.JPG pictures
.RW2 RAW files
DPOF Print & Fa-
vourite pictures
If you have not set [PC] connection by
pq
menu, press to select PC and press
If you have choosen [PictBridge] in
be displayed. Select CANCEL and then
About a PTP connection (PictBridge)
If the OS is 'Windows XP', 'Windows Vista'
BRIDGE]. The camera is then listed as an
image device.
- Pictures can only be read on the camera.
- When there are 1000 or more pictures
on a card, they may not be imported.
memory and the card while the camera is
connected.
- Do not rotate the mode dial while the
camera is connected.
- Pictures edited or rotated with a compu-
ter may be displayed in black in certain
playback modes.
- Read the instructions of your computer.
- If the remaining battery power becomes
low while the camera and the computer
are communicating, the status indica-
tor blinks and the alarm beeps. Stop the
communication at once on the computer.
Otherwise, data may be destroyed.
73