Leica D-Lux 4 Instructions Manual page 45

[AUTO REVIEW]
Set the length of time that the picture should be displayed after taking it.
[OFF]
[1 SEC.] - [2 SEC.]
[HOLD]
[ZOOM]
and displayed for 1 more second.
[NO.RESET]
Reset the file and/or folder number to 0001.
- A number between 100 and 999 can be assigned. When the folder
number reaches 999, the number cannot be reset. We recommend
formatting the card after saving the data on a PC or elsewhere.
- To reset the folder number to 100, format the built-in memory or the
card first and then use this function to reset the file number. A reset
the folder number.
[RESET]
Resets the recording- or setup settings to their initial settings.
- The folder number and the clock settings are not changed.
- When the [RESET] setting is selected during recording, the operation
ing, this is normal and not indicative of malfunctioning.
[USB MODE]
Set how to transfer pictures from the camera:
-
communication system in [PC] mode or via the "PTP (Picture Trans-
[VIDEO OUT]
Set to match the colour television system in each country.
- This will work when an AV cable is connected. See page 75.
[TV ASPECT]
Set to match the type of TV.
- This will work when an AV cable is connected. See page 75.
[m/ft]
Choose meter or feet scaling.
[SCENE MENU]
Set the screen that will appear when a scene mode has been selected:
[OFF]
[AUTO]
46
[OFF] - [1 SEC.] - [2 SEC.] - [HOLD] - [ZOOM]
= The recorded picture is not shown.
= The recorded picture is show this long.
= The recorded picture is shown until any button is pressed.
= The picture is displayed for 1 second and then enlarged 4x
[REC. SETTINGS] - [SETUP PARAMETERS]
[SELECT ON CONNECTION]
= Transfer to a PictBridge capable printer.
[PictBridge(PTP)]
= Transfer to a computer.
[PC]
[NTSC] - [PAL]
[m] - [ft]
[OFF] - [AUTO]
= The recording screen in the selected scene mode appears.
= The scene mode menu appears.
- -
= Select PictBridge or PC.
-
-