Leica D-Lux 4 Instructions Manual page 53

[I.EXPOSURE]
Contrast and exposure will be adjusted automatically when there is a
big difference in brightness between the background and subject, to
record the image the way you saw it.
effect.
- When ISO sensitivity is set to [ISO80] or [ISO100], the ISO sensitivity
might become higher than when the [I.EXPOSURE] is set.
- Depending on the conditions the effect may not be achieved.
-
[MULTI. EXPO.]
Using this function, you can achieve the kind of effect that is obtained
when an image is exposed two or three times.
1. Select [START] and press [MENU/SET].
2. Decide on the composition and take the first picture.
3. Decide on the composition, and take the second picture.
- After taking the picture, the first and second pictures taken will be
- After taking the picture, press the shutter button halfway to take the
- Press
4. Decide on the composition, and take the third picture.
- After taking the picture, the images of the first, second and third
- Press
5. Press
- The images up to the third picture taken are recorded, and the
Optionally set [AUTO GAIN] in step 1 and set it.
- Image is not recorded until completion.
- The recording information displayed for pictures taken with multiple
exposures is the recording information for the last picture taken.
images are recorded, and the multiple exposure picture-taking ses-
sion will be completed.
54
in the screen turns to yellow when [I.EXPOSURE] is in effect.
- After taking the picture, press the shutter button halfway to take
the next picture.
pq
- Press
of the following operations.
[NEXT]: Advance to the next picture.
[RETAKE]: Return to the first picture.
[EXIT]: Record the first picture and exit the session.
superimposed over each other and displayed.
next picture.
pq
of the following operations.
[NEXT]: Advance to the next picture.
[RETAKE]: Return to the first picture.
[EXIT]: Record the first picture and exit the session.
pictures taken will be superimposed over one another and displayed.
pq
return to the third picture.
q
to select [EXIT] and then press [MENU/SET].
multiple exposure picture-taking session will be completed.
[ON]: Brightness is adjusted accordingly to each pictures.
[OFF]: Exposure is compensated to the superimposed picture.
[OFF] - [LOW] - [STANDARD] - [HIGH]
[OFF] - [LOW] - [STANDARD] - [HIGH]
is displayed.
-