Layer 2 Configuration With 802.1Q Tagging And Trunk Failover - IBM Nortel Networks L2/3 Manual

noted is that this offering is basic and has limited redundancy that relies on port aggregation
and trunk failover.

7.6.1 Layer 2 configuration with 802.1Q tagging and trunk failover

Figure 7-3 illustrates the first basic Layer 2 topology.
Management
Network
Management
Workstation
Figure 7-3 Basic Layer 2 topology with 802.1Q tagging and trunk failover
Nortel Networks L2/3 Ethernet Switch Module for IBM Eserver BladeCenter
70
G0/24
Cisco 3560G
Core 1
G0/1 G0/2
Port Channel
VLAN 10, 20, 99
Ext1 Ext2 Trunk
GbESM _1
10.99.0. 243
Int1
Int2
M
M
1
1 2
Team
M
M
2
Blade
Server
1
10.20.0.1 10.10.0.2
Links between Management Modules and GbESMs not shown
9.0.0.0
G0/24
G0/23 G0/23
Int1
Int4
Int2
Int3
1 2 1 2
Team
Blade Blade
Server Server
2 3
10.10.0.3
10.20.0.3
10.20.0.2
Cisco 3560G
Core 2
G0/1 Port Channel
G0/2
VLAN 10, 20, 99
Ext1 Ext2 Trunk
GbESM _2
10.99.0. 244
Int3
Int4
1 2
Blade
Server
4
10.99.0.4
BladeCenter