IBM Nortel Networks L2/3 Manual page 145

Ethernet switch module for ibm eserver bladecenter
Table of Contents

Advertisement

/c/l3/ospf/if 35
/* -- if 45 on GbESM 2
aindex 0
ena
/c/l3/ospf/if 36
/* -- if 46 on GbESM 2
aindex 0
ena
/* also turn RIP (from previous sample) off
/cfg/l3/rip/off
Example 7-34 and Example 7-35 show the addition of OSPF to the Core switches. As in
Example 7-33 on page 130, it is assumed that RIP is not present or has been removed.
Example 7-34 Configuration for Core switch 1
router ospf 9
network 10.35.0.0 0.0.255.255 area 0.0.0.9
network 10.45.0.0 0.0.255.255 area 0.0.0.9
! turn RIP off
no router rip
Example 7-35 Configuration for Core switch 2
router ospf 9
network 10.36.0.0 0.0.255.255 area 0.0.0.9
network 10.46.0.0 0.0.255.255 area 0.0.0.9
!turn rip off
no router rip
Verifying operation of this configuration
The following commands verify that the environment is working as advertised. As with the
configuration examples, you can use the ping and tracert/traceroute commands to test
end-to-end connectivity.
GbESM commands to verify RIP
The /i/l3/route/dump command (as shown in Example 7-36) shows the entire IP routing
table on the GbESM. Routes learned from other routers are shown as indirect rip or
indirect ospf. Other routes are shown as direct or local. This is a very useful command in
all Layer 3 configurations. The /i/l3/rip/dump and /i/l3/rip/route commands provide
more detailed information about the operation of RIP.
Example 7-36 GbESM commands to verify RIP
/i/l3/route/dump
Status code: * - best
Destination
--------------- --------------- --------------- --------- --------- ---- --
0.0.0.0
0.0.0.0
* 9.42.171.0
255.255.255.0
* 9.42.171.243
255.255.255.255 9.42.171.243
* 9.42.171.255
255.255.255.255 9.42.171.255
* 10.10.0.0
255.255.255.0
* 10.10.0.243
255.255.255.255 10.10.0.243
* 10.10.0.255
255.255.255.255 10.10.0.255
Chapter 7. Nortel Networks L2/3 GbESM configuration and network integration
Mask
Gateway
9.42.171.242
9.42.171.243
10.10.0.243
Type
Tag
Metr If
indirect static
direct
fixed
local
addr
broadcast broadcast
direct
fixed
local
addr
broadcast broadcast
128
128
128
128
10
10
10
131

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents