Omega Excalibur ATV-1000 Manual page 30

#15 Disarm System Upon Activating 2nd Channel: Default ON. This Feature auto-
matically disarms the system when the "channel 2" button is pressed to operate the op-
tional output, which is typically used for trunk release. If this feature is turned off, the
channel 2 output will still operate, but the system will remain armed. When this feature is
on, activating the trunk release will be accompanied by two horn chirps and the lights
illuminating (if the previous feature is "on") to confirm disarming; when off there are still
two confirmation chirps, but no light flashes or illumination.
#16 Doorlock Pulse Time .8 or 3 Seconds: Default .8 Second. Certain vehicle's power
door locking systems require a longer output pulse to operate properly. This feature al-
lows the installer the flexibility to accommodate such systems. When programming, please
note that pressing the remote transmitter's "disarm/unlock" button sets the 3 second pulse,
and pressing the "arm/lock" button sets the .8 second pulse.
#17 Double Unlock Pulse: Default OFF. This is another power door lock-related fea-
ture provided for the installer's use. Some newer vehicles require a double pulse to re-
motely unlock the doors and/or to disarm a factory-equipped security system.
#18 3 or 45 Second Arming Delay: Default 3 Seconds. Some installation situations
require an extra amount of time for the system to become fully armed. Where needed, this
feature may be changed to delay the full arming of the system to 45 seconds. Please note
when the 45 second arming delay is used, it adds 45 seconds to all three forms of arming:
Page - 31