Table of Contents
Advertisement
L I M I T E D
L I F E T I M E
Products manufactured and sold by OMEGA RESEARCH & DEVELOPMENT,
INC. (the "Company"), are warranted to be free from defects in materials and
workmanship under normal use. If a product sold by the Company proves to be
defective, the Company will repair or replace it free of charge within the first year
and thereafter all parts to be repaired will be free with only a nominal charge for
Omega's labor and return shipping, to the original owner during the lifetime of the
car in which it was originally installed.
All products for warranty repair must be sent postage prepaid to Omega
Research & Development, Inc., P.O. Box 508, Douglasville, Georgia 30133, or
send via UPS to: 981 N. Burnt Hickory Rd., Douglasville, Georgia 30134, with
bill of sale or other dated proof of purchase. This warranty is nontransferable and
does not apply to any product damaged by accident, physical or electrical misuse
BACK COVER
or abuse, improper installation, alteration, any use contrary to its intended
function, unauthorized service, fire, flood, lightning, or other acts of God.
PRINTER'S NOTE:
This warranty limits the Company's liability to the repair or replacement of
the product. The Company shall not be responsible for removal and/or reinstallation
production back cover
charges, damage to or theft of the vehicle or its contents, or any incidental or
consequential damages caused by any failure or alleged failure of the product to
is color; this is a
function properly. UNDER NO CIRCUMSTANCES SHOULD THIS
WARRANTY, OR THE PRODUCT COVERED BY IT, BE CONSTRUED
place marker cover.
AS A GUARANTEE OR INSURANCE POLICY AGAINST LOSS. The
Company neither assumes nor authorizes any person or organization to make any
warranties or assume any liability in connection with the sale, installation, or use
of this product.
This device complies with F.C.C Rules part 15. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference
and, (2) This device must accept any interference that may be received, including
interference that may cause undesired operation.
The manufacturer is not responsible for any radio TV interference caused by
unauthorized modifications to this equipment. Such modifications could void the
user's authority to operate the equipment.
Omega Research and Development, Inc.
Douglasville, Georgia
www.caralarm.com
W A R R A N T Y
P. O. Box 508
30133
03/07 MO-CG 850i5 REV1
Crime Guard
850i
OPERATION MANUAL
FRONT COVER
PRINTER'S NOTE:
production front cover
is color; this is a
place marker cover.
COPYRIGHT 2007: OMEGA RESEARCH & DEVELOPMENT, INC.
5
Advertisement
Table of Contents
Related Manuals for Omega Crime Guard 850i5
Summary of Contents for Omega Crime Guard 850i5
- Page 1 850i Omega's labor and return shipping, to the original owner during the lifetime of the car in which it was originally installed. All products for warranty repair must be sent postage prepaid to Omega Research &...
-
Page 2: Complete Programmable Features Matrix
1.75 (2) 2.5 (maximum) (3) Remote Start Relay Ignition (L) Accessory (U) Starter (2) Omega Research and Development, Inc. Arm/Disarm or Add. Chan. Arm/Disarm (L) Arm/Ch. 5 (U) Ch. 4 / Disarm (2) Ch. 4 / Ch. 5 (3) www.caralarm.com... -
Page 3: Table Of Contents
Time can be used for difficult-to-start engines. This feature should only be This Booklet Contains programmed by the installer. Note: “Base timing” is the maximum time period that the 850i will engage the Introduction to the System ............. 4-6 starter, but only if it does not detect the engine has started running. Status Light, Valet Switch, Controller &... -
Page 4: Introduction To The System
This feature should only be programmed by the installer, and the operation of security and convenience system available today, the Crime Guard 850i by Omega this feature depends on the correct connection of the safety wire to the vehicle’s Research and Development. To enjoy the most from your new system, please take parking brake. - Page 5 Feature #3 Horn Relay Functions “P”rogram “III” button Factory Default Setting Horn Output button “II” button “disarm/unlock” press “arm/lock” button to program button Options: press “disarm/unlock” button to program Door Unlock Ignition Output press “II” button to program press “III” button to program Accessory Output This is the second of two built-in relays which can be programmed to perform several different functions.
-
Page 6: Status Light, Valet Switch, Controller & Transmitter System Versatility - An Important Note
• The first setting (programmed by the “arm/lock” button) has the system “II” or “ ” produce both the lock and unlock outputs as .8 second in duration. This is the • Pressing the “ ” button for two seconds can be used to activate an extra output, most common form of output needed, which interfaces most vehicles. -
Page 7: Using The Crime Guard System
The Installer Programmable Features Using the Crime Guard System Your Crime Guard system is designed to deter theft of both your vehicle and its Installer Programmable Features should only be used by the original contents. “Arming” your system turns on its protection, disabling the vehicle’s or other qualified installer, AND individual Installer Features should starter and locking the doors. -
Page 8: Automatic "Last Door Arming" Of The System
The Crime Guard system’s separate “arm/lock” and “disarm/unlock” button Option: press “arm/lock” button to program design allows repetitive operation- if already armed, pressing the “arm/lock” When this feature is turned on, if one of the vehicle's doors is open at the time that button will simply rearm the system, and vice versa when pressing the “disarm/ the system is armed via the controller or transmitter, the siren will chirp 3 times and unlock”... -
Page 9: While The System Is Armed, And Should It Trigger
applications is being used to sound the vehicle’s existing horn. This feature changes must be closed to initiate the Last Door Arming sequence. only the primary audible output, so that it can be utilized to sound the existing To temporarily prevent the system from automatically Last Door Arming, you have horn by itself. -
Page 10: Disarming The System Using The Controller Or Transmitter
is pressed. Which button being pressed has these effects upon the triggered Crime Feature #12 Parking Light Illumination Upon Disarm Guard system: press “arm/lock” button to program Factory Default Setting • Pressing “arm/lock” will rearm the system, stopping both system’s alarm press “disarm/unlock”... -
Page 11: Safety Disarm Feature; Activation Alert; Automatic Rearming Disarming By Emergency Override
press “disarm/unlock” button to program briefly showing the number of operating controllers or transmitters. press “II” button to program Chirps Excepting Valet Mode If the Crime Guard was activated and reset itself: press “III” button to program The disarming Chirps in Valet Mode Only confirmation will no longer be 2 siren chirps, and the parking lights flashing twice This feature removes the system’s 1 arming and 2 disarming confirmation chirps. -
Page 12: Remote Panic Feature
Step 2 Using the ignition key, turn the vehicle’s ignition switch on. Feature #6 Doors Lock With Ignition On Factory Default Setting press “arm/lock” button to program Step 3 Within 5 seconds press and release the Valet Switch one time. The system press “disarm/unlock”... -
Page 13: Remote Engine Starting
Feature #3 Automatic Rearming Remote Engine Starting Factory Default Setting press “arm/lock” button to program The remote engine starting feature should not be used when Options: the vehicle is parked in an enclosed structure or garage! press “disarm/unlock” button to program On without doors locking On with doors locking press “II”... - Page 14 Feature #1 SecureCode safety circuit stops the engine, the “crossed out key” icon will momentarily appear (but not if the transceiver’s command stops the engine). Factory Default Setting 1 Press If a safety circuit prevents the starting attempt, the “engine stopped” melody Options: 1 to 9 presses, in each of two stages will play, and the “crossed out key”...
- Page 15 following procedure must be performed before exiting the vehicle: Each of the Programmable Features is described in detail in the following pages. The User Programmable Features are described as Step 1 With the engine running and foot on the brake, apply the parking brake, put a first group, and the Installer Programmable Features as a second the transmission shifter in “neutral”, and remove your foot from the brake.
-
Page 16: Other Controller And Transmitter Operations
Low Battery Automatic Starting Feature: This feature may be used any- To Access a Feature: time. Setting this feature to operate has the 850i automatically start the engine Step 4 Within 10 seconds, Press & Release the Valet Switch the same num- should the vehicle battery voltage drop to 11 volts. -
Page 17: Using The Valet Switch
How to Program Features interior lights for 30 seconds, unlocking the doors, and disarming the system if it was armed. The 2nd channel output will not operate when the ignition switch is "on" To a large extent the Crime Guard 850i ’s versatility is due to an incredible array unless the vehicle's door is open. - Page 18 Alarm Valet Mode: This allows you to turn off all of the “alarm” operations of Step 2 Within 5 seconds of turning on the ignition, press the Valet Switch 5 times. the security system while retaining the remote convenience features such as keyless The siren will briefly sound, confirming that for the next 10 seconds the entry, Panic, and the Auxiliary Outputs.
-
Page 19: Securecode
Controller and Transmitter Protection soon as the two chirps are heard, press the brake pedal but do not release the Valet Switch. As soon as a second set of two chirps is heard, the Valet Switch may be The Crime Guard 850i features several security safeguards in one of the most released. -
Page 20: The Status Light
Should two failed SecureCode attempts be made, the system will ignore any further Anti-Carjacking Protection presses of the Valet Switch for two minutes. The Crime Guard is equipped with three separate Anti-Carjacking protection In addition to Emergency Override, if any of the three anti-carjacking features features, whose operation may be selectively activated by the ignition, by an open are utilized, a correct customized SecureCode would also be required to turn off door, or by the transmitter. - Page 21 Start Melody; and Stop Melody These are played with remote starting. violations, the Status Light will show the two most recent violations in the order in Programming these features is a sequential process- the controller is placed into which they occurred. programming mode, then each programmable operation is accessed in turn, and either 9) 2 Red Flashes / Pause = System was triggered by open hood or trunk.
-
Page 22: 2-Way Controller
The 2-Way Controller hammer and impact icon appears, and the controller chips until any button is pressed, and the icon remains flashing until the ignition switch is turned on. The four system- operating buttons are described on pages 5 and 6. This section •...