AL-1000-EDP Omega's labor and return shipping, to the original owner during the lifetime of the car in which it was originally installed. All products for warranty repair must be sent postage prepaid to Omega Research &...
Chan. 4 Latch (2) Chan. 4 On Demand (3) 24 Factory Alarm Disarm Output Disarm (L) Horn, med (U) Chan. 5 Latch (2) Chan. 5 On Demand (3) installation features Omega Research and Development, Inc. www.caralarm.com Page - 2 Page - 31...
This Booklet Contains The final 3 Programmable Features are for the installer’s use. Note: Features #23 and #24 involve two outputs of the Excalibur control unit Introduction to the System ............. 4-6 which give the installer greater flexibility. These outputs can be programmed Transmitter, Status Light, Valet Switch to perform several different functions.
These features are described to explain their function; as these features are dependent upon the installation configuration within the convenience system by Omega Research and Development. You will find that your vehicle, they should not be changed except by the original dealer or new system will give you years of trouble-free convenience and protection.
4th and 5th channels to the “III” button, in the same manner as the 3rd channel. - IMPORTANT - The Excalibur AL-1000-EDP is one of the most versatile vehicle security systems made. It has many programmable features which can offer more functions and operations which are described in the basic system instructions.
The Excalibur AL-1000-EDP is capable of having the optional This feature converts the system into a strictly Remote Keyless Entry System by Omega “Echo” added to it, which would add 2-way control and eliminating all antitheft alarm-oriented operations and features. When this feature confirmation paging.
Feature #11 Alarm Duration Using the Excalibur System Factory Default Setting 30 Seconds Your Excalibur system is designed to deter theft of both your vehicle and its press “arm/lock” button to program contents. “Arming” your system turns on the protection, disabling the vehicle’s Options: press “disarm/unlock”...
Arming Bypass: Upon arming, if any system sensing circuit is inoperable, Feature #8 Open Door Bypass of Ignition Locking that circuit only will automatically be bypassed. When an unsecured sensing circuit Factory Default Setting press “arm/lock” button to program is in a bypassed state, all other normally operating circuits will be protected. Should press “disarm/unlock”...
While the System is Armed, and should it Trigger Feature #5 Ignition Activated Override press “disarm/unlock” button to program Factory Default Setting While the security system is armed, this is indicated by a slowly flashing Status Option: press “arm/lock” button to program Light.
Feature #2 Last Door Arming Disarming the System Factory Default Setting There are two methods of disarming the Excalibur: press “arm/lock” button to program 1- The primary method is to use the transmitter by pressing and releasing its Options: “disarm/unlock” button. This is the normal “daily use” method. press “disarm/unlock”...
Exit Programming mode: Automatic Rearming Feature: Automatic Rearming is a programmable feature which ensures that your system is never inadvertently disarmed. It is Step 7 Allow 10 seconds to pass without performing any programming possible to accidentally or unknowingly operate the transmitter from a pocket or actions, or turn the vehicle’s ignition on.
Remote Panic Feature How to Program Features The vehicle ignition key and the Valet Switch are used to enter the Programming Should you feel threatened, or the need to attract attention, you can activate your system's remote “Panic” feature at any time by pressing and holding for 3 seconds Mode, then the transmitter is used to change features.
The 2nd channel output, which is operated by pressing and holding the transmitter “II” button for 1 second, is designed specifically to operate your The Excalibur AL-1000-EDP’s versatility is due to an incredible array of vehicle’s electric power trunk release. Your vehicle will respond by releasing programmable features.
Using the Valet Switch system). When the first transmitter code is learned all existing stored codes will be erased. The Valet Switch may be mounted in a special holder with the Status light, or Step 3 Press the “arm/lock” button on each remaining transmitter. optionally, the installer may have mounted it independently in a hidden, yet The system will chirp the siren once to confirm that each was learned.
Transmitter Protection SecureCode The Excalibur system features several security safeguards in one of the most “SecureCode” allows the user to customize the number of Valet Switch presses vulnerable areas of any remotely controlled system. These features are: which are required to successfully perform an Emergency Override. The basic Emergency Override procedure is described on page 11.
The Status Light Anti-Carjacking Protection The Excalibur is equipped with three separate Anti-Carjacking protection The Status Light visually confirms the status of the system and provides a high features, whose operation may be selectively activated by the ignition, by an open level of visual deterrence.