Omega Excalibur ATV-1000 Manual page 29

mation chirps; the silent operation may be achieved on a onetime temporary basis by pressing
and releasing the transmitter's "channel 2" button twice when arming or disarming the
system. Even if this feature is used to remove the confirmation chirps, the audible Unau-
thorized Transmitter Alert feature will still operate as described on page 17 and 20.
#12 Confirmation Chirps While In Valet Mode: Default OFF. While the system is in
the Valet Mode, the transmitter will still remotely lock and unlock the vehicle's doors. This
feature adds the confirmation siren chirps if the transmitter is used to lock or unlock the
doors while the system is in Valet Mode.
#13 Activated Alarm Cycle 60 or 30 Seconds: Default 60 Seconds. This feature offers
a choice of activated alarm durations. When programming, please note that pressing the
remote transmitter's "arm/lock" button sets the cycle at 60 seconds, and pressing the "dis-
arm/unlock" button sets the 30 second time.
#14 Lights On 30 Seconds Upon Disarm: Default ON. This feature turns on the park-
ing and interior lights for 30 seconds after the two light flashes upon disarming the system.
This feature allows inspection of the area around and inside the vehicle when approaching
in the dark. When programming, please note that pressing the remote transmitter's "arm/
lock" button sets the lights being on for 30 seconds, and pressing the "disarm/unlock"
button configures the system to only flash the lights twice.
Page - 30