Advertisement

L I M I T E D
L I F E T I M E
Products manufactured and sold by OMEGA RESEARCH & DEVELOPMENT,
INC. (the "Company"), are warranted to be free from defects in materials and
workmanship under normal use. If a product sold by the Company proves to be
defective, the Company will repair or replace it free of charge within the first year
and thereafter all parts to be repaired will be free with only a nominal charge for
Omega's labor and return shipping, to the original owner during the lifetime of the
car in which it was originally installed.
All products for warranty repair must be sent postage prepaid to Omega
Research & Development, Inc., P.O. Box 508, Douglasville, Georgia 30133, or
send via UPS to: 981 N. Burnt Hickory Rd., Douglasville, Georgia 30134, with
bill of sale or other dated proof of purchase. This warranty is nontransferable and
does not apply to any product damaged by accident, physical or electrical misuse
BACK COVER
or abuse, improper installation, alteration, any use contrary to its intended
function, unauthorized service, fire, flood, lightning, or other acts of God.
PRINTER'S NOTE:
This warranty limits the Company's liability to the repair or replacement of
the product. The Company shall not be responsible for removal and/or reinstallation
production back cover
charges, damage to or theft of the vehicle or its contents, or any incidental or
consequential damages caused by any failure or alleged failure of the product to
is color; this is a
function properly. UNDER NO CIRCUMSTANCES SHOULD THIS
WARRANTY, OR THE PRODUCT COVERED BY IT, BE CONSTRUED
place marker cover.
AS A GUARANTEE OR INSURANCE POLICY AGAINST LOSS. The
Company neither assumes nor authorizes any person or organization to make any
warranties or assume any liability in connection with the sale, installation, or use
of this product.
This device complies with F.C.C Rules part 15. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference and,
(2) This device must accept any interference that may be received, including
interference that may cause undesired operation.
The manufacturer is not responsible for any radio TV interference caused by
unauthorized modifications to this equipment. Such modifications could void the
user's authority to operate the equipment.
Omega Research and Development, Inc.
Douglasville, Georgia 30133
www.caralarm.com
W A R R A N T Y
P. O. Box 508
08/07 MO-AL-1500-EDP
Excalibur
AL-1500-EDP
OPERATION MANUAL
FRONT COVER
PRINTER'S NOTE:
production front cover
is color; this is a
place marker cover.
COPYRIGHT 2007: OMEGA RESEARCH & DEVELOPMENT, INC.

Advertisement

Table of Contents
loading

Summary of Contents for Omega Excalibur AL-1500-EDP

  • Page 1 AL-1500-EDP Omega's labor and return shipping, to the original owner during the lifetime of the car in which it was originally installed. All products for warranty repair must be sent postage prepaid to Omega Research &...
  • Page 2: Complete Programmable Features Matrix

    Chan. 4 Latch (2) Chan. 4 On Demand (3) 24 Factory Alarm Disarm Output Disarm (L) Horn, med (U) Chan. 5 Latch (2) Chan. 5 On Demand (3) installation features Omega Research and Development, Inc. www.caralarm.com Page - 2 Page - 35...
  • Page 3: Table Of Contents

    This Booklet Contains The final 3 Programmable Features are for the installer’s use. Note: Features #23 and #24 involve two outputs of the Excalibur control unit Introduction to the System ............. 4-6 which give the installer greater flexibility. These outputs can be programmed Status Light, Valet Switch, Controller &...
  • Page 4: Introduction To The System

    Excalibur AL-1500-EDP by vehicle, they should not be changed except by the original dealer or Omega Research and Development. To enjoy the most from your new system, qualified installer. please take a few moments to learn about the principal user components, and the basic operation of the system.
  • Page 5 Feature #18 Door Activated Anti-Carjacking Protection “P”rogram “III” button Factory Default Setting press “disarm/unlock” button to program button “II” button press “arm/lock” button to program Option: “disarm/unlock” This form of Anti-Carjacking is initiated by a door being opened. The Anti- button Carjacking protection, including the three ways to initiate it are described on page Feature #19 Remote Activated Anti-Carjacking Protection...
  • Page 6: Status Light, Valet Switch, Controller & Transmitter System Versatility - An Important Note

    - IMPORTANT - Feature #16 Alarm Functions Bypass The Excalibur AL-1500-EDP is one of the most versatile vehicle press “disarm/unlock” button to program Factory Default Setting security systems made. It has many programmable features which press “arm/lock”...
  • Page 7: Using The Exclibur System

    Feature #11 Alarm Duration Using the Excalibur System Factory Default Setting 30 Seconds Your Excalibur system is designed to deter theft of both your vehicle and its press “arm/lock” button to program contents. “Arming” your system turns on the protection, disabling the vehicle’s Options: starter and locking the doors.
  • Page 8: Automatic "Last Door Arming" Of The System

    Feature #8 Open Door Bypass of Ignition Locking The Excalibur system’s separate “arm/lock” and “disarm/unlock” button design allows repetitive operation- if already armed, pressing the “arm/lock” button Factory Default Setting press “arm/lock” button to program will simply rearm the system, and vice versa when pressing the “disarm/unlock” press “disarm/unlock”...
  • Page 9: While The System Is Armed, And Should It Trigger

    Feature #5 Ignition Activated Override must be closed to initiate the Last Door Arming sequence. To temporarily prevent the system from automatically Last Door Arming, you have press “disarm/unlock” button to program Factory Default Setting these options: put the system into Valet Mode (page 14 and 15), leave the door open, Option: press “arm/lock”...
  • Page 10: Disarming The System Using The Controller Or Transmitter

    Feature #2 Last Door Arming buttons are pressed. Which controller button that is pressed will have these corresponding effects upon the triggered Excalibur system: Factory Default Setting • Pressing “arm/lock” will rearm the system, stopping both system’s alarm press “arm/lock” button to program Options: condition (leaving it armed), and stop the controller’s chirping.
  • Page 11: Safety Disarm Feature; Activation Alert; Automatic Rearming Disarming By Emergency Override

    Exit Programming mode: and briefly showing the number of operating controllers or transmitters. Step 7 Allow 10 seconds to pass without performing any programming If the Excalibur was activated and reset itself: The disarming confirmation actions, or turn the vehicle’s ignition on. will no longer be 2 siren chirps, and the parking lights flashing twice before staying •...
  • Page 12: Remote Panic Feature

    Step 2 Using the ignition key, turn the vehicle’s ignition switch on. How to Program Features Step 3 Within 5 seconds press and release the Valet Switch one time. The system The vehicle ignition key and the Valet Switch are used to enter the Programming will disarm.
  • Page 13: Other Controller And Transmitter Operations

    “II” button for 1 second, is designed specifically to operate your vehicle’s electric power trunk release. Your vehicle will respond by releasing The Excalibur AL-1500-EDP’s versatility is due to an incredible array of the trunk lid or rear hatch, chirping the siren twice, turning on your parking and programmable features.
  • Page 14: Using The Valet Switch

    Step 2 Within 5 seconds of turning on the ignition, press the Valet Switch 5 times. Using the Valet Switch The siren will briefly sound, confirming that for the next 10 seconds the The Valet Switch is located in the Window Unit, or optionally, the installer may system is ready to learn a controller/transmitter code.
  • Page 15: Securecode

    To Exit Valet Mode, simply Press & Release the Valet Switch at any time. Controller and Transmitter Protection • The Status Light will turn off to confirm exit from either Valet Mode. The Excalibur system features several security safeguards in one of the most vulnerable areas of any remotely controlled system.
  • Page 16: The Status Light

    The Status Light Anti-Carjacking Protection The Excalibur is equipped with three separate Anti-Carjacking protection The Status Light visually confirms the status of the system and provides a high features, whose operation may be selectively activated by the ignition, by an open level of visual deterrence.
  • Page 17: 2-Way Controller

    6) Press and release the “:” button. Each press of the button changes to The 2-Way Controller the next melody, note that the LCD screen displays “S” and a numeral, which The four system- operating buttons are described on pages 4-7. This section is the melody number.
  • Page 18 be used with an optional remote starting unit; the remote “start” icon (below) rapid fashion, as in quickly repeating arm and disarm cycles, the controller will will operate, but not this icon. not have time to receive the signal from the system, and therefore it will stop re- sponding and reporting the system’s status.

Table of Contents