Table of Contents
Advertisement
L I M I T E D
L I F E T I M E
Products manufactured and sold by OMEGA RESEARCH & DEVELOPMENT,
INC. (the "Company"), are warranted to be free from defects in materials and
workmanship under normal use. If a product sold by the Company proves to be
defective, the Company will repair or replace it free of charge within the first year
and thereafter all parts to be repaired will be free with only a nominal charge for
Omega's labor and return shipping, to the original owner during the lifetime of the
car in which it was originally installed.
All products for warranty repair must be sent postage prepaid to Omega
Research & Development, Inc., P.O. Box 508, Douglasville, Georgia 30133, or
send via UPS to: 981 N. Burnt Hickory Rd., Douglasville, Georgia 30134, with
bill of sale or other dated proof of purchase. This warranty is nontransferable and
does not apply to any product damaged by accident, physical or electrical misuse
BACK COVER
or abuse, improper installation, alteration, any use contrary to its intended
function, unauthorized service, fire, flood, lightning, or other acts of God.
PRINTER'S NOTE:
This warranty limits the Company's liability to the repair or replacement of
the product. The Company shall not be responsible for removal and/or reinstallation
production back cover
charges, damage to or theft of the vehicle or its contents, or any incidental or
consequential damages caused by any failure or alleged failure of the product to
is color; this is a
function properly. UNDER NO CIRCUMSTANCES SHOULD THIS
WARRANTY, OR THE PRODUCT COVERED BY IT, BE CONSTRUED
place marker cover.
AS A GUARANTEE OR INSURANCE POLICY AGAINST LOSS. The
Company neither assumes nor authorizes any person or organization to make any
warranties or assume any liability in connection with the sale, installation, or use
of this product.
This device complies with F.C.C Rules part 15. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference
and, (2) This device must accept any interference that may be received, including
interference that may cause undesired operation.
The manufacturer is not responsible for any radio TV interference caused by
unauthorized modifications to this equipment. Such modifications could void the
user's authority to operate the equipment.
Omega Research and Development, Inc.
P. O. Box 508
Douglasville, Georgia
www.caralarm.com
W A R R A N T Y
30133
03/09 MO-AL-1610-EDP REV0
Excalibur
AL-1610-EDP
OPERATION MANUAL
FRONT COVER
PRINTER'S NOTE:
production front cover
is color; this is a
place marker cover.
COPYRIGHT 2009: OMEGA RESEARCH & DEVELOPMENT, INC.
Advertisement
Table of Contents
Related Manuals for Omega Excalibur AL-1610-EDP
Summary of Contents for Omega Excalibur AL-1610-EDP
- Page 1 Company will repair or replace it free of charge within the first year and thereafter all parts to be repaired will be free with only a nominal charge for Omega's labor and return shipping, to the original owner during the lifetime of the AL-1610-EDP car in which it was originally installed.
-
Page 2: Complete Programmable Features Matrix
1.75 (||) 2.5 (maximum) (|||) Remote Start Relay Ignition (L) Accessory (U) Starter (||) Omega Research and Development, Inc. Arm/Disarm or Add. Chan. Arm/Disarm (L) Arm/Ch. 5 (U) Ch. 4 / Disarm (||) Ch. 4 / Ch. 5 (|||) www.caralarm.com... -
Page 3: Table Of Contents
for the voltage sensing type of starter output operation. There are four Table of Contents different base starter output settings. While the default-set minimum is sufficient for most vehicles; the Extended Starter Cranking Time can be Introduction ................4-7 used for difficult-to-start engines. This feature should only be pro- Status Light, Valet Switch &... -
Page 4: Introduction
This sophisticated, state-of- operation of this feature depends on the correct connection of the safety the-art product deters theft of your vehicle, and its contents. Omega wire to the vehicle’s parking brake. - Page 5 to be a door lock relay, or as medium-capacity ignition or accessory outputs, button switches, each being labeled with an icon as to function. if needed for remote starting use. However, a popular upgrade option supplementing the standard trans- mitter is the Echo 2-way controller. The Echo, in addition to operating your system, also receives signals from the system, and displays a variety of Feature #3 Horn Relay Functions system conditions on its LCD screen.
-
Page 6: The Transmitter
(press red “|||” button to program) • Pressing the “arm/lock” and “disarm/unlock” buttons together activates The Omega AL-1610-EDP has two built-in relays, which can be pro- the remote starting feature of the AL-1610-EDP. grammed to perform several different functions. The primary function of this relay, is to operate the vehicle’s dome, or interior lighting as part of the... -
Page 7: Status Light, Valet Switch & Transmitter System Versatility - An Important Note
The Installer Programmable Features “ ” • Pressing the “ ” button for two seconds can be used to activate an extra output, known as the “2nd channel”, for an optional function Installer Programmable Features should only be used by the original such as trunk release. -
Page 8: Using The Al-1610-Edp System
Using the AL-1610-EDP System 15 Minutes (press “||” button to program) 20 Minutes (press red “|||” button to program) Your AL-1610-EDP system is designed to deter theft of both your vehicle This feature sets the period of time that the engine will run after being and its contents. -
Page 9: Automatic "Last Door Arming" Of The System
Feature #18 Door Activated Anti-Carjacking Protection lock” button will simply rearm the system, and vice versa when pressing the “disarm/unlock” button. Factory Default Setting (press “disarm/unlock” button to program) Option: (press “arm/lock” button to program) This form of Anti-Carjacking is initiated by a door being opened. The Anti- Arming Bypass: Upon arming, if any system sensing circuit is inoperable, Carjacking protection, including the three ways to initiate it are described on that circuit only will automatically be bypassed. -
Page 10: While The System Is Armed, And Should It Trigger
you have these options: put the system into Alarm Valet Mode (page 19), a system activation, or alarm, cannot occur. This Arming Delay allows the leave the door open, or, in most cases turning on the dome light may cause system to completely process its sensory parameters, which can include the system to detect that your door is still open. -
Page 11: Prewarning Detection Circuit
Feature #11 Alarm Duration Prewarning Detection Circuit: When the sensor is triggered by a light impact or shock to the vehicle, the security system will respond by chirping Factory Default Setting 30 Seconds (press “arm/lock” button to program) the siren 3 times and locking the doors. After this Prewarning circuit has Options: been triggered five times it will automatically shutdown until the alarm 60 Seconds... -
Page 12: Safety Disarm Feature; Activation Alert; Automatic Rearming Disarming By Emergency Override
Safety Disarm/Storm Mode: While the system is activated, i.e. sounding Feature #8 Open Door Bypass of Ignition Locking the siren and flashing the lights, pressing the “disarm/unlock” button will Factory Default Setting (press “arm/lock” button to program) disarm the system, but not unlock the doors. This safety feature ensures Option: (press “disarm/unlock”... -
Page 13: Remote Panic Feature
Emergency Override is custom-programmable! This is the SecureCode Feature #5 Ignition Activated Override feature, which is described on page 21. The above Emergency Override Factory Default Setting (press “disarm/unlock” button to program) instructions reflect the “as received from the factory” default setting. Option: (press “arm/lock”... -
Page 14: Remote Engine Starting
Options: On without doors locking (press “disarm/unlock” button to program) Your Omega AL-1610-EDP system offers the ultimate in comfort and On with doors locking (press “||” button to program) convenience- remote engine starting. This feature allows the vehicle’s “Automatic Rearming”, described on page 12, prevents the system from... - Page 15 Feature #2 Last Door Arming trunk, or a pressed brake pedal. Factory Default Setting (press “arm/lock” button to program) “Stick Shift” Remote Starting Setup Procedure: When the Omega AL- Options: 1610-EDP is installed into a manual transmission vehicle, Installer Pro- On without doors locking (press “disarm/unlock”...
- Page 16 Step 1 With the engine running and foot on the brake, apply the parking Each of the Programmable Features is described in detail in the brake, put the transmission shifter in “neutral”, and remove your foot following pages. The User Programmable Features are described as from the brake.
- Page 17 To Access a Feature: Low Battery Automatic Starting Feature: This feature may be used Step 4 Within 10 seconds, Press & Release the Valet Switch the same anytime. Setting this feature to operate has the AL-1610-EDP automati- cally start the engine should the vehicle battery voltage drop to 11 volts. number of times as the desired feature’s number.
-
Page 18: Other Transmitter Operations
Other Transmitter Operations How to Program Features To a large extent the Omega AL-1610-EDP’s versatility is due to an To Silently Arm or Disarm the alarm, press and release the “ ||” bu tton incredible array of programmable features- 33 main-system programmable twice. -
Page 19: Using The Valet Switch
Standard Programming: Using this method to program additional or Using the Valet Switch- replacement transmitters and/or optional 2-way controllers does not turn on Alarm Valet Mode & Starting Valet Mode or otherwise affect the Unauthorized Transmitter Alert (UTA) feature. The Valet Switch has several functions: Step 1 Have all transmitters and/or optional controllers which are to operate the system at hand. - Page 20 Transmitter Protection Starting Valet Mode: This feature is similar to Alarm Valet Mode, but its The Omega AL-1610-EDP features several security safeguards in one purpose is turn off the remote starting operations of the system. The system of the most vulnerable areas of any remotely controlled system. These may be placed into Starting Valet Mode and Alarm Valet Mode indepen- apply with both 1-way transmitters and optional 2-way controllers.
-
Page 21: Securecode
Anti-Carjacking Protection SecureCode The Omega AL-1610-EDP features three separate Anti-Carjacking “SecureCode” allows the user to customize the number of Valet Switch protection features, whose operation may be selectively activated by the presses which are required to successfully perform an Emergency Override. -
Page 22: The Status Light
The Status Light Starting System Status: The Status Light uses the color Green to indicate the status of the remote starting part of the system: The Status Light visually confirms the status of the system and provides a high level of visual deterrence. Two colors are shown- Red for security 12) Off = The remote starter system is off and in standby mode.