Remote Starting The Engine - Omega Comfort Start Operating & Installation Instructions Manual

Table of Contents

Advertisement

Remote Starting
To Activate Remote Start:
*
THE PARKING LIGHTS
WILL TURN ON, OFF, THE
ENGINE STARTS, THEN
THE PARKING LIGHTS
RESUME ILLUMINATION
- The parking lights will turn on and the status light will flash to confirm the
starting process, and the horn will also chirp 3 times.
- The ignition circuit will turn on.
- Within a few seconds the parking lights will turn off and the starter will engage.
- The engine will start, run, and the starter will be disengaged.
- The parking lights will turn back on and remain on while the Comfort Start is
controlling the engine. The status light will continue to flash slowly.
- If the engine stalls, the Comfort Start will make two attempts to restart it.
When you leave your vehicle, simply set the climate controls for what you
desire to be operating upon remote start - heater, defroster or air conditioning.
Press & Release the upper
transmitter START button
6
operate the vehicle's on-board doorlocking relays.
doorlocking system requires more than 500mA Negative output, optional relays must be
used.
Control
Module
Red Connector
Green Wire To Switch
Blue Wire To Switch
Door Lock Wire
Door Unlock Wire
Door Lock
Switch
Ground
If the vehicle's Negative pulse
Negative Pulse System Using
Direct Connection
+
Vehicle's Doorlock
Doorlock
Relay Control Unit
Actuators
Unlock
Lock
35

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents