Remote Panic & Emergency Flashlight - Omega Comfort Start Operating & Installation Instructions Manual

configured as follows:
Control Gray Wire
Module
Trunk
Switch
In some applications the solenoid wire will rest at ground. In these cases:
- Cut the solenoid wire:
- Connect the switch side to pin # 87a of the external relay.
- Connect the solenoid side to pin # 30 of the external relay.
- Connect 12 Volts to pin # 87 of the external relay (Fused).
20-Gauge Brown Wire:
Connection If Desired.
put designed to sound the vehicle's horn for audible operation confirmations and the
remote "panic" feature. The Brown wire may be connected directly to the vehicle's horn
Connect to 12 Volts or Negative
Ground as needed (In this example
Negative is required)
30
12 Volts
85 87a 86
87
Relay
( - ) Horn Output
The Brown wire is a 500mA Negative out-
32
To Activate Panic*:
Release
Solenoid
*
To Operate the Emergency Flashlight:
Remote Panic & Emergency Flashlight
Press & Hold the left transmitter LOCK button
THE PARKING LIGHTS
WILL FLASH
THE HORN WILL
SOUND
- The horn will sound and the parking lights will flash. To deac-
tivate Panic, press either the LOCK or UNLOCK button.
* Connection of the horn may require additional parts, and may not be
included in a standard installation.
- Pressing this button lights the transmitter's
Cool Blue LED light brightly without send-
ing a radio transmission. This should
used sparingly, to prolong the
9
for 3 seconds
Press the transmitter LIGHT
button
transmitter battery life.