Enabling Nview Span And Clone Modes - Detaching The Secondary Display Device - Nvidia Quadro Workstation User Manual

3 Click the nView Display Settings menu option. Notice that the nView modes list
is set to Dualview.
Enabling nView Span and Clone Modes — Detaching the
Secondary Display Device
Note: In the following steps, we'll switch from Dualview to Span or Clone mode for
each of the two NVIDIA GPU‐based graphics cards. You will notice that the
secondary displays become detached (disabled) because nView Span and
Clone modes do not detect the secondary display device as separate display
devices.
1 Right click on either display image 2 or 4, representing the GeForce4 MX‐based
graphics card.
2 Click Properties and then click the NVIDIA GPU‐labeled tab to open the
associated NVIDIA GPU (GeForce4 MX) page.
3 Click the nView Display Settings menu option.
4 Click the nView modes list and select Horizontal Span, then click Apply/
5 Wait while the display devices adjust modes.
The resulting Windows Display Properties Settings page and desktop are shown
in Figure A.7 and Figure A.8.
NVIDIA Corporation
Using Two NVIDIA GPU-Based Graphics Cards
Appendix A
161