Initial Installation Of Nview Dualview Mode - Windows 2000 - Nvidia Quadro Workstation User Manual

Chapter 4
Using nView Multi-Display Settings
Initial Installation of nView Dualview Mode — Windows 2000
Note: When you start Windows 2000 with an NVIDIA GPU‐based multi‐display
graphics card (or multiple NVIDIA GPU‐based graphics cards), you are not yet
in Dualview mode. You can confirm this when you view the Windows Display
Properties Settings page and see only one display image in the display.
Follow these steps to enable Dualview.
1 Make sure your multi‐display NVIDIA GPU‐based graphics card is properly
installed in your computer and securely connected to your displays. Make sure
your displays are turned on and the NVIDIA display driver has been properly
installed on your computer.
2 After Windows starts up, right click on your desktop to open the Windows
desktop menu. Then select the display for which you want to open the NVIDIA
display menu and select the nView Display Settings option.
3 Click the arrow in nView display modes list and select Install Dualview
(Advanced) as shown in Figure 4.9.
Figure 4.9
46
(nView Display Settings — Installing Dualview in Windows 2000
User's Guide