Table of Contents
Advertisement
Enabling nView Span and Clone Modes — Detaching the
Secondary Display
Note: In the following steps, we'll switch from Dualview to Span or Clone mode for
each of the two NVIDIA GPU-based graphics cards. You will notice that the
secondary displays become detached (disabled) because nView Span and
Clone modes do not detect the secondary display as separate displays.
1 Right click on either display image 2 or 4, representing the GeForce4 MX-based
graphics card.
2 Click Properties and then click the NVIDIA GPU-labeled tab to open the
associated NVIDIA GPU (GeForce4 MX) page.
3 Click the nView Display Settings menu option.
4 Click the nView Modes list and select Horizontal Span, then click Apply/
5 Wait while the displays adjust modes. The resulting Windows Display Properties
Settings page and desktop are shown in
Figure A.7
NVIDIA Corporation
Using Two NVIDIA GPU-Based Graphics Cards (Non-SLI Configuration)
Display Properties Settings — 4 Displays with 2 Attached
4 MX 420
Figure A.7
and
Figure
Appendix A
A.8.
171
Advertisement
Table of Contents
Troubleshooting
