Advanced Timing - Nvidia Quadro Workstation User Manual

Advanced Timing

The Advanced Timing page enables you to adjust timings for your NVIDIA GPU‐
based graphics card in order to support a variety of different display timings for
ultimate flexibility for analog CRT and DVI connections.
Note: The Advanced Timing button is not available for certain NVIDIA GPU‐based
graphics cards with a DVI connector in use. DVI timing adjustment is
supported for NV3x‐based graphics cards only if they have an external TMDS,
such as the SiliconImage 164. If the graphics card uses the internal TMDS, then
the Advanced Timing button is not available. However, graphics cards that
use the internal TMDS can support refresh rates below 60 Hz using the current
NVIDIA Release 60 driver.
Note: To use the Advanced Timing page, you must be an advanced user and familiar
with the concepts of display timing standards and parameters. If you are not
familiar, it is recommended that you do not use the Advanced Timing page.
For additional details, refer to the following documents that explain display
timing standards
>> VESA and Industry Standards and Guidelines for Computer Display Monitor
Timing (DMT) published by the Video Electronics Standards Association
(VESA)
>> Coordinated Video Timing Standard published by VESA
>> EIA Standard: A DTV Profile for Uncompressed High Speed Digital Interfaces
published by the Electronic Industries Alliance
1 Click the Advanced Timing button.
If an Agreement page appears, scroll down and then click the I Agree button to
accept the agreement and open the Advanced Timing page.
The Advanced Timing configuration page (Figure 7.26) where you can select
display timing standards and custom parameters.
NVIDIA Corporation
Configuring Key ForceWare Graphics Driver Features
Chapter 7
139