Chapter 7
Configuring Key ForceWare Graphics Driver Features
4 Notice that the setting is highlighted and its slider appears at the bottom of the
page, as shown in the example in Figure 7.3.
Note: If you have chosen a setting that is application‐controlled, click the
5 Use the slider to modify the setting to suit your needs. Refer to the following
sections for additional information:
"Changing Global Driver Settings" on page 99
•
"Modifying an Existing Application Profile" on page 101
•
6 Repeat steps 3 through 5 for each driver setting you want to change.
7 Be sure to click Apply after each change you make to the global driver settings.
Figure 7.3
100
Application‐controlled check box to clear the check mark, then use the
slider to change the setting,
Changing Global Driver Settings
User's Guide