LIFESTYLER C230 831.287630 Owner's Manual page 7

DISTANCE.Displaysthe total distanceyou
have pedaled, in miles.
CALORIE.D-Displays the total number of Calodes you have burned. Note: If the pedaling resistance is
near the lowest or highest setting, the actual number of Calories you have burned will be slightly lower
or higher than the number displayed.
SCAN-Displays the SPEED, TIME, DISTANCE and CALORIE modes in a repeating cycle.
ELECTRONIC MONITOR DIAGRAM
1. LCD display.Display for all modes.
2. Mode indicator--Shows which mode is
currently selected.
3. Mode button---Selects modes.
4. On/off button--Turns the power on and off,
and resets the display.
2_ U" .... -- --U
Dist. Col. Scan
ELECTRONIC MONITOR OPERATION
Note: The electronic monitor requires two "AA" size batteries (not included). See assembly step 6 on
page 5 for battery installation instructions.
1. To tum on the power, press the on/off button or simply begin pedaling.
2. Select one of the five modes:
A. SCAN--When the power is tumed on, the SCAN mode will be selected automatically. A mode
indicator will appear by the word "SCAN." The SPEED, TIME, DISTANCE and CALORIE modes
will all be displayed, for five seconds each, in a repeating cycle. A second mode indicator will
show which mode is currently displayed.
B. SPEED, TIME, DISTANCE or CALORIE--The SPEED, TIME, DISTANCE or CALORIE mode
can be selected for continuous display by repeatedly pressing the mode button. The modes will
be selected in the following order: SPEED, TIME, DISTANCE, CALORIE, SCAN.
3. To reset the LCD display, turn the power off and then on again by pressing the on/off button twice.
4. When you are finished exercising, press the on/off button to turn off the power. Note: If the pedals
are not turned and the electronic monitor buttons are not pressed for four minutes, the power will
turn off automatically to conserve the batteries.
ELECTRONIC MONITOR CARE
Keep the electronic monitor out of direct sunlight, or the LCD display may be damaged. Clean the
monitor periodically using a soft, dry cloth. Do not allow liquidsto come in contact with the monitor.
7