Table of Contents
Advertisement
2
Troubleshooting GSLB for IPv6 configurations
bucket 2: ipv6 2001:db8::150, hit count 0
bucket 3: ipv6 2001:db8::150, hit count 0
Syntax: show gslb ipv6 phash (active-ip | allocation | table)
The optional active-ip | allocation | table parameter specifies the information that you want to see.
•
•
•
Clearing GSLB phash counters
Syntax: clear gslb ipv6 phash counter [all | zone-name <name> host-name <name>]
Troubleshooting GSLB for IPv6 configurations
The commands discussed in this section enable you to troubleshoot ServerIron ADX configurations.
Table 26
TABLE 26
Feature
Displaying GSLB debug counters
Troubleshooting IPv6 IP lists
Debug trace for GSLB
Displaying GSLB debug counters
The show gslb debug-counter command enables you view information that can enable you to
debug a GSLB configuration.
To view show GSLB debug information and error statistics, run the following command:
ServerIronADX 1000(config)#show gslb debug-counter
GSLB debug counter can not find peerTcpP when connection close: 9
GSLB debug counter 122: 261079
*********************************************
Error stats:
Num valid SI vip deletion error: 0
Num VIP SI record deletion error: 0
*********************************************
Domain IP creation stats for BP:
Num domain IPs added sync table: 33
*********************************************
PAX Mem domain IP debug information:
***********************************************
Num MP domain IP config pax mem alloc: 71
Num MP domain IP non-config pax mem alloc: 0
Num MP domain IP pax mem delete: 36
246
The table operand displays the persistent GSLB hash table.
The active-ip operand shows the current active IP address.
The allocation operand shows the hash bucket for the client IP.
lists key troubleshooting commands.
GSLB for IPv6 troubleshooting commands
ServerIron ADX Global Server Load Balancing Guide
See page...
page 246
page 248
page 248
53-1002437-01
Advertisement
Table of Contents
