Brocade Communications Systems ServerIron ADX 12.4.00 Manual Manual page 26

1
Minimum required configuration
Issue show gslb site on the controller to display site communication information. The state displays
"CONNECTION ESTABLISHED" when communication is successful. A protocol version of 1
corresponds to "ATTEMPTING CONNECTION". Established connections use protocol versions 4 or 5.
To display the default settings, enter the following command (Note the default metric processing
order).
Default metric order: ENABLE
Metric processing order:
DNS active-only: DISABLE
DNS cache-proxy: DISABLE
DNS cname-detect: DISABLE
DNS TTL: 10 (sec), DNS check interval: 30 (sec)
Remote SI status update period: 30 (sec)
Remote SI health-status update period: 5 (sec)
Session capacity threshold: 90%
Round trip time tolerance: 10%, round trip time explore percentage: 5%
Round trip time cache prefix: 20, round trip time cache interval: 120 (sec)
Round trip time cache age refresh: DISABLE
Round trip time algorithm selection:
Connection load: DISABLE
Weighted Site Metric: DISABLE
Active Bindings Metric: DISABLE
Syntax: show gslb policy
14
SLB-chassis(config)# show gslb site

SITE: brocade
Enhanced RTT smoothing: OFF

SI: 1.1.1.1:
state: ATTEPTING CONNECTION
Protocol Version: 1
Active RTT gathering: NO
Secure Authenticate/Encrypt: NO
1-Server health check
2-Remote SI's session capacity threshold
3-Round trip time between remote SI and client
4-Geographic location
5-Remote SI's available session capacity
6-Least response selection
DNS best-only: DISABLE
DNS transparent-intercept: DISABLE
Modify DNS response TTL: ENABLE
Session availability tolerance: 10%
USE PASSIVE ONLY
Weighted IP Metric: DISABLE
ServerIron ADX Global Server Load Balancing Guide
DNS override: DISABLE
53-1002437-01