Brocade Communications Systems ServerIron ADX 12.4.00 Manual Manual page 254

Global server load balancing guide
Table of Contents

Advertisement

2
Displaying GSLB for IPv6 configurations
TABLE 24
This field...
Active bindings
Site
Weight
Si Name
Session util
Avail. sessions
Preference
Metric counter
For descriptions of the other information displayed by the show gslb dns detail command, refer to
"Displaying DNS zone and hosts"
Displaying site information
Use the show gslb site command to display the following information about sites:
The show gslb site command can be used with or without the <site-name> variable, which specifies
a single site. If this variable is omitted, all sites are displayed.
242
Global SLB zone and host application information
ServerIron ADX name and management IP address
Site name (displayed only if you display information for all sites rather than an individual site)
State of the GSLB protocol connection between GSLB ServerIron ADX and site ServerIron ADX
Number of sessions in the ServerIron ADX's session table
The percentage of the total number of sessions the ServerIron ADX can maintain that are in
use
The percentage of the ServerIron ADX's CPU that is actively engaged in SLB and other activities
The numeric preference value for this site ServerIron ADX
The geographic location of the ServerIron ADX
The virtual IP addresses (VIPs) configured on the ServerIron ADX
Displays...
Active bindings are a measure of the number of active real servers
bound to a Virtual IP address (VIP) residing on a GSLB site. The GSLB
ServerIron ADX
uses the active bindings metric to select the best IP
address for the client. The VIP with the highest number of active
bindings is the IP address preferred by the active bindings metric
Indicates the site name of the ServerIron ADX.
The weight assigned to the address for the weighted IP metric. Refer to
"Specifying the weight of IP addresses in the IP list"
Indicates the site ServerIron ADX name and management IP address.
Indicates the percentage of the ServerIron ADX session capacity that is
in use. This information is reported by the site ServerIron ADX using the
GSLB protocol.
Indicates the number of unused sessions in the ServerIron ADX's
session table.
The numeric preference value for this site ServerIron ADX. The
preference can be used by the GSLB policy to select a site. Refer to
ServerIron ADX's administrative preference"
The metric statistics are displayed under the Metric counter line. In this
example, sites 10.18.2.15 and 2001:db8::a have each been selected as
the best site once. This is shown in the DNS resp. selection counters
column. The least response metric was used once to select each site.
on page 237.
ServerIron ADX Global Server Load Balancing Guide
on page 210.
"Site
on page 11.
53-1002437-01

Advertisement

Table of Contents
loading

This manual is also suitable for:

Serveriron adx

Table of Contents