Brocade Communications Systems ServerIron ADX 12.4.00 Manual Manual page 179

To display information about the GSLB site called "sunnyvale" and the ServerIron ADXs providing
SLB within those sites, enter the following command.
ServerIronADX(config)# show gslb site sunnyvale
ServerIronADX: slb-1 209.157.22.209:
state: CONNECTION ESTABLISHED
Current num.
sessions
Virtual IPs:
ServerIronADX: slb-2 209.157.22.210:
state: CONNECTION ESTABLISHED
Current num.
sessions
Virtual IPs:
The show gslb site display shows the following information.
TABLE 10
This field...
ServerIron ADX name and IP address
SITE
ServerIron ADX
State
Current num. sessions
Session util (%)
CPU load (%)
ServerIron ADX Global Server Load Balancing Guide
53-1002437-01
Session CPU load
util(%) (%)
500000 50
209.157.22.227(A)
Session CPU load
util(%) (%)
1 0
209.157.22.227(S)
Global SLB site information
Displaying GSLB information
Preference Location
35 128 N-AM
Preference Location
16 128 N-AM
Displays...
For each ServerIron ADX, the first item of information listed is the name
and management IP address. This is the information you specified when
you added the ServerIron ADX to the site.
Indicates the site name of the ServerIron ADX.
NOTE: This field appears only when you enter the show gslb site
command without specifying a site name.
Indicates the site ServerIron ADX name and management IP address.
The state of the GSLB protocol connection between the GSLB ServerIron
ADX and the site ServerIron ADX. The state can be one of the following:
•
ATTEMPTING CONNECTION: The GSLB ServerIron ADX is still trying
to establish a GSLB connection with the site ServerIron ADX.
•
CONNECTION ESTABLISHED: The GSLB ServerIron ADX has
established a GSLB connection with the site ServerIron ADX.
•
SELF: The GSLB ServerIron ADX is also this site ServerIron ADX.
The number of sessions in the ServerIron ADX's session table. A session
is a one-way connection to or from a real server.
This information is reported by the site ServerIron ADX.
NOTE: The number of sessions in the table does not necessarily match
the number of active sessions on the real servers. This can occur
if the session table contains sessions that are no longer active
but have not yet timed out.
The percentage of available sessions that are in use. This is the
percentage of the total number of sessions the ServerIron ADX can
maintain that are in use. For example, if the ServerIron ADX can
maintain 1 million sessions (the default session capacity) and the
session table contains 500,000 session entries, the session utilization
is 50%.
This information is reported by the site ServerIron ADX.
The percentage of the ServerIron ADX's CPU that is actively engaged in
SLB and other activities.
This information is reported by the site ServerIron ADX.
1
167