Table of Contents
Advertisement
1
Site persistence in GSLB using stickiness
Enabling sticky GSLB
Enabling sticky GSLB is the minimum required configuration.
On the GSLB controller, to enable Sticky GSLB globally for all the domains, enter commands such
as the following:
SLB-Ctrl-ServerIronADX(config)#gslb policy
SLB-Ctrl-ServerIronADX(config-gslb-policy)#sticky
On the GSLB controller, to enable Sticky GSLB for a specific host, enter commands such as the
following:
SLB-Ctrl-ServerIronADX(config)#gslb-host-policy test
SLB-Ctrl-ServerIronADX(config-gslb-host-policy-test)#sticky
SLB-Ctrl-ServerIronADX(config)#gslb dns zone gslb.com
SLB-Ctrl-ServerIronADX(config-gslb-dns-gslb.com)#host-info www gslb-policy test
This example defines a host policy, then applies that policy to the specific host www. The sticky is
one function within the host policy.
66
ServerIron ADX Global Server Load Balancing Guide
53-1002437-01
Advertisement
Table of Contents
