Syntax: clear gslb dns zone-name [<name>]
Replace <zone-name> with the zone for which you want to clear the DNS selection counters. To
clear the counters globally (for all zones), do not enter a <zone-name>.
Displaying detailed DNS information
Use the show gslb dns detail command to view detailed information about the DNS zones and host
names on GSLB controllers. Using this command, you can view key information about a zone
including its IP list and selection criteria as well as information about the site and ServerIron ADX
on which a VIP is configured.
The command can be used with or without the <zone-name> variable, which specifies a single
zone. If this variable is omitted, all zones are displayed.
To display detailed GSLB information about a specific DNS zone, you must specify the zone such as
in the example:
ServerIronADX# show gslb dns detail brocade.com
ZONE: brocade.com
HOST: www
(Global GSLB policy)
GSLB affinity group: global
*
*
*
*
Syntax: show gslb dns detail [<zone-name>]
The <zone-name> parameter specifies a particular GSLB zone.
ServerIron ADX Global Server Load Balancing Guide
53-1002437-01
10.18.2.155:
cfg
v-ip
Active Bindings: 1
site: A, weight: 0, SI: name (10.18.2.150)
session util:
preference: 128
Metric counter (count [selection-metric]):
1 [least-response]
2001:db8::a:
cfg
v-ip
Active Bindings: 0
site: B, weight: 0, SI: name (10.18.2.160)
session util:
preference: 128
Metric counter (count [selection-metric]):
1 [least-response]
10.18.25.23:
cfg
real-ip ACTIVE N-AM
2001:db8::1:
cfg
real-ip DOWN
Displaying GSLB for IPv6 configurations
Flashback
delay
(x100us)
TCP
APP
ACTIVE
N-AM
0
0
0%, avail. sessions: 3999980
ACTIVE
N-AM
0
0
0%, avail. sessions: 5999985
470
1093
N-AM
---
---
2
DNS resp.
selection
counters
Count (%)
1 (33%)
1 (33%)
1 (33%)
0 (0%)
241