Brocade Communications Systems ServerIron ADX 12.4.00 Manual Manual page 181

The GSLB protocol allows you to query the site ServerIron ADXs for configuration information as
well as the session and CPU information used by the GSLB policy. You can view detailed
configuration information and statistics for the site ServerIron ADX, from the GSLB management
console. You can display the following information:
•
•
•
•
To display real server information for the real servers configured on a remote ServerIron ADX, enter
commands such as the following at any level of the GSLB ServerIron ADX's CLI.
ServerIronADX(config)# rshow 209.157.22.209 server real
Real Servers Info
Name : rs1
IP:10.10.10.1
Port
----
ftp
http
default unbnd
Server
Name : rs2
IP:10.10.10.2
Port
----
ftp
http
default unbnd
Server
The command in this example displays real server configuration information for the remote
ServerIron ADX with management IP address 209.157.22.209. As shown in
this ServerIron ADX is part of the "sunnyvale" site and is configured to load balance two real
servers. In this example, the real servers are named rs1 and rs2.
Syntax: rshow <remote-ip-addr> server real | virtual | session | bind
The <remote-ip-addr> parameter specifies the remote ServerIron ADX's management IP address.
The real | virtual | session | bind parameter specifies the information you want to display:
•
•
•
•
ServerIron ADX Global Server Load Balancing Guide
53-1002437-01
Real server configuration
Virtual server configuration
Port binding information (for the bindings between TCP/UDP ports on the real servers and the
virtual server that represents the real servers)
Session statistics for sessions between clients and the real servers
Range:1
State Ms CurConn TotConn Rx-pkts
----- -- ------- ------- -------
enabled 0 0
enabled 0 0
0 0
Total 0
Range:1
State Ms CurConn TotConn Rx-pkts
----- -- ------- ------- -------
enabled 0 0
enabled 0 0
0 0
Total 0
real: displays real server information. This option is equivalent to entering the show server real
command on the remote ServerIron ADX.
virtual: displays virtual server information. This option is equivalent to entering the show server
virtual-name-or-ip command on the remote ServerIron ADX.
session: displays session statistics. This option is equivalent to entering the show server
session command on the remote ServerIron ADX.
bind: displays port binding information. This option is equivalent to entering the show server
bind command on the remote ServerIron ADX.
Displaying GSLB information
State:Active
Tx-pkts
-------
0 0 0
0 0 0
0 0 0
0 0 0
State:Active
Tx-pkts
-------
0 0 0
0 0 0
0 0 0
0 0 0
Mac-addr: abcd.5a11.d042
Wt:1 Max-conn:1000000
Rx-octet Tx-octet
-------- --------
0 0
0 0
0 0
0 0
Mac-addr: abcd.5a11.d043
Wt:1 Max-conn:1000000
Rx-octet Tx-octet
-------- --------
0 0
0 0
0 0
0 0
Figure 1 on page 4,
1
Reas
----
0
0
0
0
Reas
----
0
0
0
0
169