Sub Monitor (B, C And W Types) - Furuno FAR-2107(-BB) Operator's Manual

1.54 Sub Monitor (A, B, C and W types)
The picture from a radar outside the LAN network can be shown on this radar
(processor unit+display unit+control unit).
1. Put the cursor in the ANTENNA box at the upper left side of the screen.
2. Right-click to show the ANT SELECT menu.
[ANT SELECT]
ANT1:
12
ANT2:
12
ANT3:
12
ANT4:
12
OWN RADAR No.: 2
1 DISP1
2 DISP2
3 DISP3
4 DISP4
9 STORE INTER-SW
NO/YES
0 SUB MONITOR*
OFF/ON
* Not available on IMO or A radar.
3. Spin the scrollwheel to select 0 SUB MONITOR then push the left button.
4. Spin the scrollwheel to select ON then push the left button.
The antenna box shows "SUB" and the image from the sub monitor is shown
on this radar
5. Push the right button to close the menu.
Antenna-related functions of the sub monitor; for example, pulselength, cannot
be controlled from this radar.
X-BAND
FORE
X-BAND
MAIN TOP
X-BAND
MAIN TOP
X-BAND
AFT
ANT1
MASTER
ANT2
MASTER
ANT3
MASTER
ANT4
MASTER
1. RADAR OPERATION
1-105