Own Ship Symbol - Furuno FAR-2107(-BB) Operator's Manual

1. RADAR OPERATION
1.34.4

Own ship symbol

The own ship symbol marks own position on the display. It can be turned on or
off and its configuration selected from the MARK menu. Two configurations are
available: minimized symbol and scaled symbol. The scaled symbol is scaled to
indicate the length and beam of the vessel. If the largest dimension of the
symbol gets smaller than 6 mm, the symbol will disappear and own ship will be
with a minimized symbol. Ship's dimensions should be entered at installation to
use the scaled ship symbol.
Antenna
position
1. Left-click the MENU box to open the menu.
2. Select 2 to show the MARK MENU.
3. Select OFF, MIN or SCALED as appropriate.
4. Push the right button twice to close the menu.
1-60
Heading line
X
Beam line
Scaled symbol
Heading line
Beam line
Minimized symbol