Td Display Setup - Furuno 1833 Operator's Manual

5. CUSTOMIZING YOUR UNIT
5.7.3

TD display setup

The TD SETUP menu sets which Loran C or Decca chain to use to display TD
position. (Connection of a Loran C or Decca navigator is not necessary to
display TD position.) Press the [MENU] key followed by the SYSTEM
CONFIGURATION, NAV OPTION and TD SETUP soft keys to display this menu.
Displaying Loran C TDs
1. Select GRI, then press the EDIT soft key to show the GRI & station pair
window.
2. Adjust the trackball upward or downward to select GRI code.
3. Roll the trackball rightward to show the display below, to enable selection of
station pair.
4. Adjust the trackball vertically to select station pair.
5-24
LORAN-C
GRI
9940:11-27
U.S. WEST COAST
CORRECTION 1
+000.0 µs
CORRECTION 2
+000.0 µs
DECCA
CHAIN
01 R-G
S BALTIC
CORRECTION 1
+00.00 lane
CORRECTION 2
+00.00 lane
TD setup menu
GRI & STATION PAIR
9940 11-27
U.S. WEST COAST
Loran GRI & station pair window
GRI & STATION PAIR
9940 11-27
U.S. WEST COAST
Loran C GRI & station pair window
TD
SETUP
EDIT
RETURN