Light Bulb Replacement; Vacation Tips; Energytips - Kenmore 67277 Owner's Manual

Vacation Tips
Light Bulb Replacement
WARNING: Disconnect power to refrigerator
before replacing light bulb to avoid electrical shock
which can cause severe personal injury or death After
replacing light bulb, restore power,
CAUTION: Observe the following to avoid
personal injury or property damage
Allow light bulbs to cool
Wear gloves when replacing light bulb.
• Remove light bulb cover by removing W' hex nut
screws, RepTace bulb(s) with 40-watt appliance
bulb(s).
• Replace light bulb cover by replacing W' hex nut
screws,
I/4" hex
nut screws
cover
Complete the following steps for short vacations
1 Remove perishable foods
2o If an ice maker is installed, move ice maker arm to
Offposition (See "Automatic Ice Maker" section page
12)
Complete the following steps for long vacations.
1 Empty refrigerator and freezer sections
2, Unplug refrigerator,
3 Clean refrigerator and door gaskets according to
General Cleaning instructions in "Care and Cleaning"
section,.
4, Prop doors open, so air can circulate inside
5. If an ice maker is installed, turn off water supply to
refrigerator and move ice maker arm to Off
position, (See "Automatic Ice Maker" section page 12)
Energy Tips
This refrigerator is designed to be one of the most energy
efficient refrigerators available Reduce energy use by
observing the following.
• Operate in normal household temperatures of 55 ° to
110°F (13 ° to 43°C) away from heat sources and direct
sunlight.
° Set refrigerator, freezer, and temperature controlled
meat drawer system controls no colder than necessary
• Keep freezer section full.
° Keep door gaskets clean and pliable, Replace gaskets
if worn..
. Keep condenser coils clean
15