Removing A Hard Drive - NEC HX4600 User Manual

Removing a Hard Drive

Use this procedure to remove a hard drive from your system.
1. Power off the system. If locked, unlock and open the right front door.
2. Determine which hard drive cage contains the hard drive you want to remove. Open
the EMI metal panel in front of the hard drive cage by turning its two thumb lock
screws counter clockwise (see Figure 4-25).
3. The hard drive cage has four hard drive slots. Confirm which slot of the hard drive
cage contains the hard drive to be removed.
4. Grasp the handle of the hard disk's carrier and press down on its thumb-release
button (see Figure 4-28).
5. Remove the hard disk and place it in an antistatic wrapper. Close the EMI metal
panel, and secure with the two thumbscrews.
6. Power on the system and close the front door.
Figure 4-28. Removing the Hard Disk Carrier
Upgrading Your System 4-39