NEC HX4600 User Manual page 123

Table 5-1. POST Error Codes and Messages (continued)
Error Code and Message
0B36 Fan 7 Alarm occurred.
0B40 Invalid System Configuration
Data
0B41 System Configuration Data
Read error
0B42 Resource Conflict
0B43 WARNING: IRQ not
configured
0B44 Expansion Rom not initialized
0B45 System Configuration Data
Write Error
0B50 CPU#1 with error taken off
line.
0B51 CPU#2 with error taken off
line.
0B52 CPU#3 with error taken off
line.
0B53 CPU#4 with error taken off
line.
0B58 Forced to use CPU#1 with
error
0B59 Forced to use CPU#2 with
error
0B5A Forced to use CPU#3 with
error
0B5B Forced to use CPU#4 with
error
Explanation
Optional board cooling fan error
System configuration data is
damaged.
Read error on the data
configuring the system
The PCI board resource is not
properly mapped.
The PCI board interrupt is not
properly set.
The expansion ROM on the PCI
board is not initialized.
Write error on the data
configuring the system.
Because an error was detected in
CPU #1, it was disabled.
Because an error was detected in
CPU #2, it was disabled.
Because an error was detected in
CPU #3, it was disabled.
Because an error was detected in
CPU #4, it was disabled.
An error was detected in CPU#1. The system is started forcibly
An error was detected in CPU#2. Follow 0B58 "Action."
An error was detected in CPU#3. Follow 0B58 "Action."
An error was detected in CPU#4. Follow 0B58 "Action."
Action
Check whether the fan is
clogged. Clean it if the fan is
covered with dust. If no error
is found or the failure is
cleared in spite of cleaning,
contact your customer service
representative.
Start the BIOS Setup Utility to
set the time again. If the
same error reoccurs, contact
your customer service
representative.
Ask your customer service
representative for System I/O
board replacement.
Start the BIOS Setup Utility
for reset. If the same error
reoccurs, contact your
customer service
representative.
Follow OB42 "Action."
Check PCI board installation.
If the same error reoccurs,
ask your customer service
representative for System I/O
board replacement.
Ask you customer service
representative for System I/O
board replacement.
The CPU is disabled. Contact
your customer service
representative.
Follow 0B50 "Action."
Follow 0B50 "Action."
Follow 0B50 "Action."
though an error is detected in
the CPU displayed. Contact
your customer service
representative.
Problem Solving 5-13