System Feature Summary - NEC HX4600 User Manual

Table of Contents

Advertisement

System Feature Summary

A summary of the system features is included in Table 1-1.
Feature
Modular board set
Add-in board support
3 1/2-inch diskette drive
One location for a 3 1/2-inch
removable media device
5 1/4-inch SCSI CD-ROM
Three locations for 5 1/4-
inch removable media
devices
12 locations for 3 1/2-inch
Ultra2 Wide SCSI-2 hard
drives
Hot swap-capable
backplane
Power supply
Software: utilities, setup
Security
Table 1-1. System Features
Description
System is intended for use with a modular board set based on Pentium III
Xeon processor technology; from one to four 500 MHz processors and up
to 8 GB of memory.
System I/O board supports up to 11 add-in boards (ten PCI boards,
including four slots supporting 64-bit PCI boards, and one combination
PCI/ISA board slot).
3 1/2-inch diskette drive is externally accessible.
One externally accessible 3 1/2-inch half-height bay is available for server
expansion.
5 1/4-inch CD-ROM drive is externally accessible.
Three externally accessible 5 1/4-inch half-height bays are available for
server expansion (diskette, CD-ROM, and/or tape drives).
Three hard disk drive cages; each holding up to four 3 1/2-inch hot-
swappable Ultra2 wide SCSI-3 hard drives. Each cage is secured behind
a metal EMI door; drives can be swapped in or out of the system without
powering it down. The array of drives allows easy setup of RAID
applications.
A hot swap-capable backplane is part of each drive cage assembly for
SCSI hard drives. The backplane is designed for Ultra2 wide SCSI-3
devices that use the industry standard 80-pin Single Connector Attach
(SCA) connector. The backplane consists of a row of four drive
connectors.
From two to three 560 Watt autoranging power supplies are easily
removed/installed for service. In a three-supply system, the third supply is
redundant.
BIOS Setup and Symbios Configuration Utility. The E
CD-ROM contains utilities and drivers. The ESMPRO CD-ROM contains
the server management software.
Mechanical: Key lock at the front door. One intrusion sensor for front door
to secure diskette, hard disk, removable media device, power on/off
switch, reset switch, top cover, and left/right panel access. Three power
inter-lock sensors one on each side of the chassis and one on top of the
chassis. BIOS: Password enable.
B
XPRESS
UILDER
System Overview 1-3

Advertisement

Table of Contents
loading

Table of Contents