Exiting Adaptec Scsi Utility; Installing Video Drivers - NEC NEAX Express User Manual

Adaptec SCSI Utility Setup Configurations (Continued)
OPTION
Display <Ctrl-A> Messages During BIOS
Initialization
Extended BIOS Translation for DOS
Drives >1 GByte
Verbose/Silent Mode
Host Adapter BIOS (Configuration Utility
Reserves BIOS Space)
Support Removable Disks
Under BIOS as Fixed Disks
BIOS Support for Bootable CD-ROM
BIOS Support for Int13 Extensions
1
No effect if BIOS is disabled.
2
Do not remove media from a removable media drive if it is under BIOS control.

Exiting Adaptec SCSI Utility

To exit the Adaptec SCSI Utility, press ESC until a message prompts you to exit
(if you changed any settings, you are prompted to save the changes before you
exit).

Installing Video Drivers

After configuring the system, you need to install video drivers to take full
advantage of the features of the onboard Cirrus Logic CL-GD5480 super VGA
video controller.
T
The CD shipped with your system includes video drivers for use with
DOS and Windows NT. Check the README.TXT file on the CD for
information on installing these drivers.
T
For other operating systems, see your OS instructions for installing
device drivers.
RECOMMENDED SETTING
OR DISPLAY ONLY
Enabled
Enabled
Verbose
Enabled
Boot Only
1, 2
Enabled
Enabled
YOUR
CONFIGURATION
1
1
1
1
Configuring Your System 3-23