Installing a Pedestal System
c. Push the ejector levers into the closed position and tighten the thumbscrews
so that the system is installed in the case as shown in
Figure 3-3. CPU-I/O Enclosures Fully Inserted in a Pedestal Case
3. Attach the bezel.
a. Standing in front of the system, position the bezel so that the LED light
extensions that are inside the bezel are on the bottom.
b. Press the bezel towards the mounting rails until the bezel snaps into place.
3-4
Express5800/320Ma: System Installation Guide
Figure
asys26
3-3.