Installing the System Components
1. Install the backplane assembly.
a. At the rear of the system, install the backplane assembly (item 2 in
inserting the thumbscrews (item 1) into the screw holes as shown in
Figure
b. Slide the backplane assembly slightly to the right and secure it in place by
tightening the thumbscrews.
Figure 2-9. Installing the Backplane Assembly on a Rack-Mounted System
1
2
1
1
Thumbscrews
2
Backplane assembly
2-9.
Installing the System Components
asys022c
Installing a Rack-Mountable System
Figure
2-9),
2-11