3. Install the CPU- I ⁄ O enclosures.
a. Place each CPU- I ⁄ O enclosure on a flat surface and turn the two
thumbscrews (item 1 in
the two ejector levers down (item 2).
b. Slide each CPU- I ⁄ O enclosure into a shelf and, with the ejector levers in the
open position, slide the CPU- I ⁄ O enclosure all the way into its opening.
W A R N I N G
!
Lifting an enclosure requires two people.
Figure 2-11. Installing the CPU-I/O Enclosures into a Cabinet
1
2
1
Thumbscrew
2
Ejector lever
Figure
2-11) counterclockwise to loosen them and pull
2
Installing a Rack-Mountable System
Installing the System Components
1
asys021a
2-13