Kenmore One-Speed Automatic Washers Owner's Manual & Installation Instructions page 35

Problem Possible Cause Solution
Tearing Overloading. Improper Loads should move freely during
use of washer, wash. Wash smaller loads or
increase water level
Improper use of chlorine Do not pour chlorine bleach directly
bleach. Undiluted bleach on Ioad. Wipe up bleach spills.
will damage fabrics.
Sharp items not removed Clean out pockets before washing.
from pockets; fasteners Zip zippers before washing.
not fastened.
Items damaged before Mend rips and broken threads in
washing, seams before washing.
Stains on Improper use of fabric Dilute fabric softener and add to
Load softener in washer or dryer, deep rinse only.
Iron in water (rust). Install an iron filter.
Under use of detergent causing Use enough detergent to remove
soil to be redeposited, soil and hoId it in suspension.
Dye transfer due to not Sort dark clothing from whites
sorting loads properly, and lights.
Dye transfer due to not Unload the washer as soon as
unloading washer promptly, it stops.
Load is Not removing Ioad promptly. Unload the washer as soon as it
Wrinkled stops.
Wrong cycle for fabrics Use cold rinses to reduce wrinkIing.
being washed.
Overloading. Loads should move freely during
wash. Wash smalIer loads.
Hoses reversed. Reverse hoses (see "Installation
Instructions," Sections D & E).
Load is Overloading. Loads should move freely during
Tangled/ wash. Wash smalIer loads.
Twisted
Clothes wrapped around Do not wrap items around agitator
agitator, when loading washer.
35